• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Power steering hose help.

  • Thread starter Thread starter maxbolt
  • Start date Start date Nov 28, 2012
M

maxbolt

New Member
Nov 28, 2012
2
0
1
Nov 28, 2012
#1
  • Nov 28, 2012
  • #1
A hose coming from the bottom of the power steering pump appears loose and is leaking fluid.
What is the name of this hose and how do I fix it?
I have two pictures attached pointing to the hose and you can see the space where fluid is leaking from between the hose and the nut it goes into.
Thank you.
 

Attachments

  • 20121128_1532212.webp
    691.2 KB · Views: 148
  • 20121128_153158 (1)2.webp
    645.2 KB · Views: 149
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
Nov 28, 2012
#2
  • Nov 28, 2012
  • #2
there are 2 little teflon seals that you need to replace inside the fitting. they are carried by advance auto and oreillys, dorman 82540 is the part number.
that line is supposed to be able to swivel .
I believe that one of the seals will have to be set in a hot pot of water in order for it to stretch big enough to go over the fitting. just buy 2 packs in case you mess one of them up. they are like 3 bux per pack. g luck
 
Reactions: Kilgore Trout
M

maxbolt

New Member
Nov 28, 2012
2
0
1
Nov 28, 2012
#3
  • Nov 28, 2012
  • #3
rockyracoon said:
there are 2 little teflon seals that you need to replace inside the fitting. they are carried by advance auto and oreillys, dorman 82540 is the part number.
that line is supposed to be able to swivel .
I believe that one of the seals will have to be set in a hot pot of water in order for it to stretch big enough to go over the fitting. just buy 2 packs in case you mess one of them up. they are like 3 bux per pack. g luck
Click to expand...
Thank you. that is what I was thinking wasn't sure though.
Do I just undo the bolt the fitting goes into and pull it off to put the seals on?
 
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
Nov 28, 2012
#4
  • Nov 28, 2012
  • #4
just unscrew the fitting from the pump body.
 
You must log in or register to reply here.

Similar threads

J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
217
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
1976 V8 power steering pressure hose source???
  • 68stangcjfb
  • May 19, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
275
1974 - 1978 Mustang II Talk & Tech May 22, 2025
Ricksshop
R
A
Engine 99 V6 Steering Pump Replacement
  • abs68206
  • May 23, 2025
  • SN95 V6 Mustang Tech
Replies
0
Views
185
SN95 V6 Mustang Tech May 23, 2025
abs68206
A
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
481
Fox 5.0 Mustang Tech Jun 21, 2025
limp
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?