Pypes Muffler Delete

mwhite29 · Jan 16, 2008

I ordered these from Brenspeed this morning. Couldn't beat the price at $189 compared to the $420 summit racing wants for them. Anyone ordered from Brenspeed before and now how long they take to get stuff out to you?

sonnier · Jan 16, 2008

I'm somewhat interested in these but don't know if I want that much sound from having no muffler. I may just go with the Violators.

DarkFireGT · Jan 16, 2008

I ordered my Pypes O/R H pipe on a Thursday morning and it arrived Friday. (the next day)

His shipping is quick. You'll get it by the end of the week, as long as it's in stock.

kooldawg6 · Jan 16, 2008

DarkFireGT said:
His shipping is quick. You'll get it by the end of the week, as long as it's in stock.

+1
I never had to wait a whole week the two times I've ordered from him.

bigcat · Jan 16, 2008

yep, i think it was 2-3 days after my order

mwhite29 · Jan 17, 2008

Well, my exhaust is 2 hours away at 12:15 AM but isn't supposed to be here till tomorrow. I love UPS! LOL.
It was nice that Brent got them out that day though. I'll definitely be buying from him again.

DarkFireGT · Jan 17, 2008

Yeah, his free shipping is faster than express shipping with most places. I've had OVERNIGHT shipping take 3 days before!

dmaxstang · Jan 17, 2008

sound clip????

Can we get a sound clip upon successful installation of said fast shipped product? I have a broken muffler and need something new, thanks

mwhite29 · Jan 17, 2008

dmaxstang said:
Can we get a sound clip upon successful installation of said fast shipped product? I have a broken muffler and need something new, thanks

Sure can. My video recorder is a few years old now so im not sure about the quality... but i can do it.

sonnier · Jan 17, 2008

Just ordered mine today from Brenspeed. Can't wait to get them.

xxrequiemxx · Jan 17, 2008

I actually just got my H pypes yesterday. I am a volunteer FF and since its so cold here on LI - they are letting me use a garage at the firehouse to do the switch out.

Does anyone know the exact tools I will need to do this install? Since I will have my car apart - I dont want to have to worry about driving home to get anything.

Thanks!
Nick

xxrequiemxx · Jan 17, 2008

I started to do the install.... and gave up lol. It was just to much trying to do it with a light, in the dark, in the rain!

I will wait until Sunday so I can do it during the day!

DarkFireGT · Jan 17, 2008

Spray the nuts and studs with pb blaster. It will go a lot smoother and quicker this way. You'll need a couple of extensions and a swivel. I didn't use PB blaster on the '05 and it took about 2 hours. With the '07 I used PB blaster and it took about 45 minutes. I also took the batter out, to get better light in and have more access to the electric connections for the O2 sensors.

mwhite29 · Jan 19, 2008

Getting those mufflers off was a bitch. I was seconds away from cutting them off but didn't b/c I wanted to keep them If I didnt like the pypes MD race pipes....

Well ... I LOVE them. They truly sound how a Mustang should. I even took a 45 min drive on the highway last night to go out and they were great. If anyone is looking for a deep growl, spend $189 from brenspeed and get the Pypes MD race pipes. You'll love them.

I'll get a video clip of them on here later today. It's snowing right now in Ohio and it's cold as hell.

Oh btw.. My passenger side sits a little lower than my driver side... Do I just bend that hanger to get it to sit up ?

DarkFireGT · Jan 19, 2008

You can, but shouldn't. Loosen the clamp on the overaxle pipe where it meets the h pipe. This will allow you to swivel it into position. You will also need to loosen the muffler delete. Having a helper here really helps. Then you just twist both until they're in the right position and tighten it up.

mwhite29 · Jan 22, 2008

Everyone at work is asking me if I have glasspacks on now lol.

1990Coupe · Jan 22, 2008

mwhite29 said:
Everyone at work is asking me if I have glasspacks on now lol.

Video plz kthanksbye

stock exhaust with just the pypes right? i mean still have the cats etc?

mwhite29 · Jan 22, 2008

1990Coupe said:
Video plz kthanksbye

stock exhaust with just the pypes right? i mean still have the cats etc?

My video recorder is too old even though it's only 5 years old now. It's a Sony Digital8 and has a memory card and 8mm tape. I can't record on my memory card b/c it's too small, I can only take pictures with it. I haven't found any larger memory card for it yet either.

It's kinda still got the stock cats....
Appearance wise it still has the cats. One of the catalysts inside the cat broke lose and was rattling. I cut it open, took it out, and welded it back up. Since the other cat was right there I did the same to it.

whyask · Jan 22, 2008

Heres a Vid with the MD on (SAME as the PYPES SYSTEM!) I have an auto .
http://justinmccauley.blogspot.com/2007_11_01_archive.html
Its at the bottom of the pics !
(this was before I did the SLP setup, had a shop weld in pipes in place of the mufflers)

'06 stang · Jan 22, 2008

I had my Violators installed Sat. and I love the sound. No drone, deep rumble at idle, and deep/aggressive at WOT. Like a muscle car should sound. The guy who did the install said it was one of the easiest swaps he had ever done. Between us BSing and him working it took him about 30-40 mins. He did have to loosen the mid pipe to center the pass. side muffler tip but besides that nothing out of the ordinary. Best bang for the buck.

Pypes Muffler Delete

Member

Member

Playing with my wife's really makes me want one.

mine works really well and can take a fair amount

start with the upper hole, and if more traction is

Member

Playing with my wife's really makes me want one.

New Member

Member

Member

Member

Member

Playing with my wife's really makes me want one.

Member

Playing with my wife's really makes me want one.

Member

Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency