re:egr delete

boondocksaint

New Member

Aug 31, 2003

75

0

0

Apr 17, 2004

#1

• Apr 17, 2004

• #1

last thing to resolve on my 87 lx is the egr. throwing a code 31 and my valve whistles as i accel.i want to delete this. now i know i can disconnect the tube from the valve and cap off both ends,but i want it to look good(stock)so im leaning towards the block off to the intake. my question is, instead of a plate(metal) what says i cant take 2 gaskets and put them together opposite of each other so there is no hole and use some gasket maker to further seal it? also whats the advantages/ disadvantages to blocking off the egr. my check engine light doesnt work so thats not an issue. thanks in advance

 

Dan P.

Founding Member

Apr 26, 2002

483

0

27

N.C.

Apr 17, 2004

#2

• Apr 17, 2004

• #2

I just took some sheet metal and cut a pattern out. It just took like 5min to do it. I still have part of the tube on there to past the visual test. I have seen a decrease in gas mileage since I have cut mine off. Take a look to see what I did.

 

boondocksaint

New Member

Aug 31, 2003

75

0

0

Apr 17, 2004

#3

• Apr 17, 2004

• #3

what gauge sheet metal is that, and did you have to do anything to your computer to let it know its not used? and what did you cut it with? all i have are tin strips and metal from those carports that are built. can i use that type of metal?

 

P

Paul C.

Founding Member

Aug 27, 2001

321

0

0

Thrall,TX

Apr 17, 2004

#4

• Apr 17, 2004

• #4

Computer won't know it's blocked. I used gasket material with on holes!!

 

9

91_4ourBanger

New Member

Feb 8, 2004

255

0

0

Apr 17, 2004

#5

• Apr 17, 2004

• #5

so your check engine light wont come on with the sheet metal?

 

Lx89Stang05

Founding Member

Oct 18, 2002

1,005

0

0

S.E. Mass

Apr 17, 2004

#6

• Apr 17, 2004

• #6

i took my egr out and i was wondering if its any harder to pass emissions with out it?? , cuz my brother has a 5.0 and it ran cleaner without his egr

 

Dan P.

Founding Member

Apr 26, 2002

483

0

27

N.C.

Apr 18, 2004

#7

• Apr 18, 2004

• #7

boondocksaint said:

what gauge sheet metal is that, and did you have to do anything to your computer to let it know its not used? and what did you cut it with? all i have are tin strips and metal from those carports that are built. can i use that type of metal?

Click to expand...

I am not sure what gauge it is, it was some my dad had laying around. I just used some metal snips that we had. The EGR system is still hooked up just blocked.