• Mustang Forums
  • Digital Self-tuning Forum

Recommend a boost controller for pnp2

  • Thread starter Thread starter Wilky-Medusa 2.0
  • Start date Start date Aug 26, 2019

Wilky-Medusa 2.0

Member
Jun 15, 2019
64
4
18
lake george, ny
Aug 26, 2019
#1
  • Aug 26, 2019
  • #1
Need a recommendation for a boost controller pnp2 thnx in advance
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,739
6,720
214
Hillsborough county
Aug 26, 2019
#2
  • Aug 26, 2019
  • #2
Mac 3 port. It's the same as the one diy sells. If you pay more than $60 you paid way too much. You can find them for as little as 20 on ebay.
 
Reactions: Wilky-Medusa 2.0

Wilky-Medusa 2.0

Member
Jun 15, 2019
64
4
18
lake george, ny
Aug 26, 2019
#3
  • Aug 26, 2019
  • #3
a91what said:
Mac 3 port. It's the same as the one diy sells. If you pay more than $60 you paid way too much. You can find them for as little as 20 on ebay.
Click to expand...
OK great thank I just looked it up saw for 22 bucks . I still have to try to put car on foot brake n see if timing is matching under boost on the pc. .. n balancer. .. thnk you had to adjust latency to 250 to get timing matched. ..so far she is idling great. ..
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,739
6,720
214
Hillsborough county
Aug 26, 2019
#4
  • Aug 26, 2019
  • #4
That's good news. Sometimes you just need some experienced advice to move you along.
 
Reactions: Wilky-Medusa 2.0

Wilky-Medusa 2.0

Member
Jun 15, 2019
64
4
18
lake george, ny
Aug 26, 2019
#5
  • Aug 26, 2019
  • #5
a91what said:
That's good news. Sometimes you just need some experienced advice to move you along.
Click to expand...
Yes sir definitely. I'll keep getting all the dumb figured out before I attempt the tune
 

Wilky-Medusa 2.0

Member
Jun 15, 2019
64
4
18
lake george, ny
Aug 31, 2019
#6
  • Aug 31, 2019
  • #6
a91what said:
Mac 3 port. It's the same as the one diy sells. If you pay more than $60 you paid way too much. You can find them for as little as 20 on ebay.
Click to expand...
first pass ever at the drags, was acting up a little
 

Attachments

  • lebenon first pass.zip
    lebenon first pass.zip
    198 KB · Views: 138

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,739
6,720
214
Hillsborough county
Aug 31, 2019
#7
  • Aug 31, 2019
  • #7
yes it was. looks a tad lean at high load. some work in the mid range and just off idle needs to be done.
 

Wilky-Medusa 2.0

Member
Jun 15, 2019
64
4
18
lake george, ny
Aug 31, 2019
#8
  • Aug 31, 2019
  • #8
a91what said:
yes it was. looks a tad lean at high load. some work in the mid range and just off idle needs to be done.
Click to expand...
I'm still having trouble with the timing. The latency was set n it changed to 0... set it back again to 250 timing isn't mathing ...went to 350 isn't maching something weird is going on with the pc or I'm not doing something right
 
You must log in or register to reply here.

Similar threads

X
Free VE Table Corrections — Drop Your MSQ and a Datalog, I'll Do the Rest
  • X-cam34
  • Apr 12, 2026
  • Digital Self-tuning Forum
Replies
8
Views
271
Digital Self-tuning Forum May 21, 2026
X-cam34
X
3
393W Stroker with Boost - Need Spark Plug Recommendations
  • 387lx
  • Apr 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
233
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 30, 2026
HotFox
C
Need MIL Eliminators?
  • crazyone64
  • May 18, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
77
SN95 4.6L Mustang Tech May 21, 2026
GOvert
G
G
Rigid-back booster seat for ‘05 convertible - recommendations needed
  • grigor108
  • Jan 18, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
108
2005 - 2014 S-197 Mustang -General/Talk- Jan 18, 2026
grigor108
G
F
1985 GT Hood decal recommendation
  • frwgt350net
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
136
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 12, 2026
frwgt350net
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Digital Self-tuning Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?