Recommend a boost controller for pnp2

[Wilky-Medusa 2.0]

Need a recommendation for a boost controller pnp2 thnx in advance

 

[a91what]

Mac 3 port. It's the same as the one diy sells. If you pay more than $60 you paid way too much. You can find them for as little as 20 on ebay.

 

[Wilky-Medusa 2.0]

Mac 3 port. It's the same as the one diy sells. If you pay more than $60 you paid way too much. You can find them for as little as 20 on ebay.

OK great thank I just looked it up saw for 22 bucks . I still have to try to put car on foot brake n see if timing is matching under boost on the pc. .. n balancer. .. thnk you had to adjust latency to 250 to get timing matched. ..so far she is idling great. ..

 

[a91what]

That's good news. Sometimes you just need some experienced advice to move you along.

 

[Wilky-Medusa 2.0]

That's good news. Sometimes you just need some experienced advice to move you along.

Yes sir definitely. I'll keep getting all the dumb figured out before I attempt the tune

 

[Wilky-Medusa 2.0]

Mac 3 port. It's the same as the one diy sells. If you pay more than $60 you paid way too much. You can find them for as little as 20 on ebay.

first pass ever at the drags, was acting up a little

 

[a91what]

yes it was. looks a tad lean at high load. some work in the mid range and just off idle needs to be done.

 

[Wilky-Medusa 2.0]

yes it was. looks a tad lean at high load. some work in the mid range and just off idle needs to be done.

I'm still having trouble with the timing. The latency was set n it changed to 0... set it back again to 250 timing isn't mathing ...went to 350 isn't maching something weird is going on with the pc or I'm not doing something right