• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

(remote starter) car cranks but does not start

  • Thread starter Thread starter jtb19nh
  • Start date Start date Nov 6, 2006

jtb19nh

Member
Jul 9, 2005
156
0
17
Nov 6, 2006
#1
  • Nov 6, 2006
  • #1
it is an 01 v6 with a remote starter... the car starts fine with the key, but when you try to use the remote starter the car just cranks but wont start.. any ideas???
 

1TallMF

New Member
Apr 17, 2006
955
1
0
Montreal
Nov 6, 2006
#2
  • Nov 6, 2006
  • #2
Is the accessory wire hooked-up properly? You should hear the fuel pump priming before it starts cranking. If not, chances are its only got the starter wire hooked-up properly and not getting any fuel or spark.
 

jtb19nh

Member
Jul 9, 2005
156
0
17
Nov 6, 2006
#3
  • Nov 6, 2006
  • #3
it has been working for a long time and it just stopped working a couple of days ago
 

jtb19nh

Member
Jul 9, 2005
156
0
17
Nov 6, 2006
#4
  • Nov 6, 2006
  • #4
where would it be wired to... where should i look first?
 

vp6799

New Member
Aug 15, 2006
124
0
0
Massachusetts
Nov 6, 2006
#5
  • Nov 6, 2006
  • #5
The security bypass module probably lost it's programming.

Put the key in the ignition but don't turn it. Then try to start it with the remote starter. If it starts, then the module probably needs programming.


Vic
 

LoudToy958

Member
Mar 30, 2005
435
0
16
Bremerton, WA
Nov 7, 2006
#6
  • Nov 7, 2006
  • #6
vp6799 said:
The security bypass module probably lost it's programming.

Put the key in the ignition but don't turn it. Then try to start it with the remote starter. If it starts, then the module probably needs programming.


Vic
Click to expand...

This would be where I start. It is not uncommon for the transponder bypass to lose program. You can do some research on the part if you like. Most common is the DEI 555F or equivilant. Any reputable shop should be able to reprogram it, or you can do it yourself. If for some reason it moved from the proper position, it may need to be moved a bit and then reprogramed.
 
T

turbogt

Member
May 1, 2003
723
16
19
Montana
Nov 7, 2006
#7
  • Nov 7, 2006
  • #7
If it remote starts with the key in the ignition I can guide you through reprogramming your bypass.
 

jtb19nh

Member
Jul 9, 2005
156
0
17
Nov 10, 2006
#8
  • Nov 10, 2006
  • #8
how do i reprogram it???
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Nov 10, 2006
#9
  • Nov 10, 2006
  • #9
jtb19nh said:
how do i reprogram it???
Click to expand...


Did you try this test yet?
 
T

turbogt

Member
May 1, 2003
723
16
19
Montana
Nov 11, 2006
#10
  • Nov 11, 2006
  • #10
Test it first with the key in the ignition, then I'll go on.
 

jtb19nh

Member
Jul 9, 2005
156
0
17
Nov 14, 2006
#11
  • Nov 14, 2006
  • #11
it does work with the key in... how do i reprogram it???
 
T

turbogt

Member
May 1, 2003
723
16
19
Montana
Nov 14, 2006
#12
  • Nov 14, 2006
  • #12
You will need two different working keys. Have your remote for the remote starter ready.. Take the first key and put it in the ignition and turn it to run. Leave it on for about 5 seconds or until the security light turns off. Then immediately remove that key and do the same with the second. After you remove the second key hit start with the remote.. It will start and learn the bypass.
 
T

turbogt

Member
May 1, 2003
723
16
19
Montana
Nov 14, 2006
#13
  • Nov 14, 2006
  • #13
Ahh ****! If you have to put your unit in reservation mode to make it start then this will not work and you will have to use a universal transponder bypass (aka) key in the box..
 

vp6799

New Member
Aug 15, 2006
124
0
0
Massachusetts
Nov 14, 2006
#14
  • Nov 14, 2006
  • #14
Gotta find out what's in there fisrt. Could be pre-programmed bypass or key in box.

When you got it installed, did they say anthing about you losing or having to get a spare key??

Try to look under your dash for a small box. There will be a couple. Look for the one with the least amount of wires coming out of it. Grab the part number from it. Do you now what alarm system is in there?? It might help.
 
You must log in or register to reply here.

Similar threads

S
All power lost at crank
  • saf_blu302
  • Mar 7, 2026
  • 1994 - 1995 Specific Tech
Replies
4
Views
375
1994 - 1995 Specific Tech Mar 12, 2026
General karthief
D
1989 mustang 5.0 crank no start
  • Darkstang302
  • Tuesday at 3:24 PM
  • Fox 5.0 Mustang Tech
Replies
7
Views
134
Fox 5.0 Mustang Tech Yesterday at 8:36 PM
AeroCoupe
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
402
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
M
Bad starter?
  • mason5.0
  • Oct 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
243
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2026
General karthief
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
259
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?