removing EGR, have questions

I've already removed the EGR valve and capped it, but what do you do about this part:


I would like to remove it, but there are two harnesses plugged into it. Should i just plug the green vacuum hose that was connected to the EGR valve and just let it be, or is there a way to remove the rest of the stuff as well, without screwing up the computer?

My exhaust doesn't have provisions for the EGR, so it was capped off. I hated the way the thing looked, so i made a block off plate and pulled the EGR.

The parts that i circled also have to do with the EGR. They had vacuum lines going from the old EGR tube into the sensors and the other sensor has a red vacuum line going into it and a green vacuum line going out (to the EGR). Since none of that is there anymore and most of those vacuum lines have just been plugged up, i would like to pull the sensors and the bracket. Just wondering if it is possible and what would need to be done.