S smokinit2 New Member Nov 15, 2003 22 0 2 Miami, Fla. May 16, 2005 #1 May 16, 2005 #1 I'm installing a GT 40 intake on a 1992 5.0 GT ,removed stock upper/lower removed throttle body after some pounding, now cant get TB plate to come off,tried pounding with a rubber mallet nothing its like melded to the stock upper,help.......
I'm installing a GT 40 intake on a 1992 5.0 GT ,removed stock upper/lower removed throttle body after some pounding, now cant get TB plate to come off,tried pounding with a rubber mallet nothing its like melded to the stock upper,help.......
Dbeck002 New Member Apr 30, 2005 710 0 0 South florida May 16, 2005 #2 May 16, 2005 #2 WD40, lots of it. remember that EGR passageways are loaded with crud because coolant flows through them, so the studs are cruddy too. just keep lubing it up.
WD40, lots of it. remember that EGR passageways are loaded with crud because coolant flows through them, so the studs are cruddy too. just keep lubing it up.
88_GT_5_oh Sportin' a turbo 5.0 in Canadistan Jul 4, 2004 1 0 1 WPG/MB/CA May 16, 2005 #3 May 16, 2005 #3 i pryed mine off with a screwdriver... then again i wasn't reusing it so it didn't matter