saleen kit

augusta · Jan 25, 2004

got into an accident last week, and new a new front and back bumper, quarter panel, and passenger's side taillight.. so i was thinking of just saying the hell with it ang getting the saleen kit. But the thing is, i dont want the back of the car to say SALEEN. How hard would it be to fill that in if the bumper was fiberglass? because i dont think you can do that to a urethane kit, can you? Anyone have any clue on pricing to do this or anything? And if anyone knows where i can find a 1/4 panel that would be nice.

Thanks!

muzztangman · Jan 25, 2004

augusta said:
got into an accident last week, and new a new front and back bumper, quarter panel, and passenger's side taillight.. so i was thinking of just saying the hell with it ang getting the saleen kit. But the thing is, i dont want the back of the car to say SALEEN. How hard would it be to fill that in if the bumper was fiberglass? because i dont think you can do that to a urethane kit, can you? Anyone have any clue on pricing to do this or anything? And if anyone knows where i can find a 1/4 panel that would be nice.

Thanks!

You might ask snkypete I know he filled his rear saleen bumper in... look on his web site it has pics.. http://www.snkypete.com/

tarch · Jan 25, 2004

don't fill with fiberglass...

however bondo or any other bumper repair thing will do just fine and it will look REALLY clean!

make sure you post pics!

2K1GtfromSC · Jan 25, 2004

I had the kit on my 01' and left the Saleen showing. I was also cloning a real one, which is OK as long as you don't pass it off as real.

tarch · Jan 25, 2004

2K1GtfromSC said:
I had the kit on my 01' and left the Saleen showing. I was also cloning a real one, which is OK as long as you don't pass it off as real.

not all people aren't trying to impersonate a saleen... some just don't like to have the saleen name on them.

i personally don't want anything on my car to say saleen, even though their cars are amazing...

TacBear · Jan 25, 2004

augusta said:
got into an accident last week, and new a new front and back bumper, quarter panel, and passenger's side taillight.. so i was thinking of just saying the hell with it ang getting the saleen kit. But the thing is, i dont want the back of the car to say SALEEN. How hard would it be to fill that in if the bumper was fiberglass? because i dont think you can do that to a urethane kit, can you? Anyone have any clue on pricing to do this or anything? And if anyone knows where i can find a 1/4 panel that would be nice.

Thanks!

I have a Saleen front that came off of a wrecked car. The car was fixed with a new bumper cover. There is onle a small tear in it that is easily fixed, infact my body man said he would repair, prep and paint it for me for the same price he would ask to prep and paint! I am in no hurry to sell it, cause if I damage mine I have a replacement. PM me if you want to talk about it

Saleen Front

tarch · Jan 25, 2004

TacBear, your linky only works for GoldMembers

augusta · Jan 26, 2004

i want it filled in because my car is a bullitt, and i dont want it saying both bullitt and saleen on the back. otherwise the saleen on the back wouldnt be a problem.

99RioRedVert · Jan 26, 2004

I was in the same situation as you. I got in an accident and messed up both bumpers and a front quarterpanel. I got the whole Saleen kit with the center exit exhaust. I didn't fill the Saleen on the back bumper but I filled all the emblem holes. Its definitely possible to fill it in. I don't know about fiberglass though.

Hoppy · Jan 26, 2004

Yea a good body shop can easily fill the bumper. Make sure the use a urethane compound and not bondo.

Mine was filled after it was "ruffed up" with a grinder, then a woven tape (looked like dry wall tape) was applied so the material could bond better. The the urethane fill material (binary mixture applied with something akin to a caulk gun) was added to the COBRA letters, smoothed out (with a credit card sized piece of plastic), left to dry for a few moments, then it was taken down with a grinder, hand sanded, cleaned, prepped, primed, and painted.

Hop

Hoppy · Jan 26, 2004

Hmmmmmmm....The picture shows in the post when previewed, but not when it's actually posted????

Edit;
Hmmmmmm.... even weirder, that pics shows up from the link I click on when I get my email notification (Hotmail opens another portal to view this thread).
I guess they want us to upgrade to Goldmembers so we can see these automatically ???

Hop

Firemanz · Jan 26, 2004

www.speedworx.com usually has some good prices on Saleen kits.......

tarch · Jan 26, 2004

there's a type of bondo or something for bumper repair... that should work fine...

stallion98gt · Jan 26, 2004

Hoppy said:
Yea a good body shop can easily fill the bumper. Make sure the use a urethane compound and not bondo.

Mine was filled after it was "ruffed up" with a grinder, then a woven tape (looked like dry wall tape) was applied so the material could bond better. The the urethane fill material (binary mixture applied with something akin to a caulk gun) was added to the COBRA letters, smoothed out (with a credit card sized piece of plastic), left to dry for a few moments, then it was taken down with a grinder, hand sanded, cleaned, prepped, primed, and painted.

Hop

that's very clean job..which body shop did u go in LA? I have couple of stuff to get done..

Hoppy · Jan 26, 2004

stallion98gt said:
that's very clean job..which body shop did u go in LA? I have couple of stuff to get done..

The shop is actually in O.C., Westminster to be exact.

The work was done by Pete Santini of Santini's Paint and Body.
Pete has worked on more cover/calender cars/bikes than you can shake a stick at. The shop is also reasonably priced considering the quality of work. Well worth the drive without a doubt.

Check the link in my signature for more pictures and if you like the work I'll get you the contact info.

Hop

stallion98gt · Jan 26, 2004

Hoppy said:
The shop is actually in O.C., Westminster to be exact.

The work was done by Pete Santini of Santini's Paint and Body.
Pete has worked on more cover/calender cars/bikes than you can shake a stick at. The shop is also reasonably priced considering the quality of work. Well worth the drive without a doubt.

Check the link in my signature for more pictures and if you like the work I'll get you the contact info.

Hop

thanks..how do u like chicane work ? do they do exhaust install too ?..u can pm me details.thanks !!!

Hoppy · Jan 27, 2004

stallion98gt said:
thanks..how do u like chicane work ? do they do exhaust install too ?..u can pm me details.thanks !!!

Chicane is great. I wouldn't go anywhere else for my mechanical work.

Joe at Chicane did the original mods to the stock exhaust when I had the torque arm installed....and it was a great job. No leaks, no problems, no issues.

The first set of MagnaFlows was put on by a shop in Lomita....very poorly. I then went to the guy that Joe originally recommended and am extremely happy. I had Tom Morse (Morse Muffler) TIG welded for a cleaner look and it is a superb job.

Joe does the installation of exhaust systems at the shop, but he recommended Morse Muffler as I needed mods on the system for the panhard bar and torque arm.

Hop

turbogt · Jan 27, 2004

Warning! Saleen=Poor Quality. I know, twice now. The prep work required is ridiculous compared to a normal bumper cover, and fit is also horrible.

tarch · Jan 27, 2004

turbogt said:
Warning! Saleen=Poor Quality. I know, twice now. The prep work required is ridiculous compared to a normal bumper cover, and fit is also horrible.

i always recommend to people to get a take off from a saleen and work with that...

1999limitedGT · Jan 29, 2004

could always hit... http://www.mrbodykit.com/bodykits/99mustang.htm

The "Saleen" kit doesnt say "Saleen" on the back, not really sure what the quality is like, but from what everyone says about the authentic saleen kit, cant be TOO much worse & its way cheaper....

saleen kit

augusta

New Member

muzztangman

tarch

My 8V > 4V > 2V

2K1GtfromSC

tarch

My 8V > 4V > 2V

TacBear

tarch

My 8V > 4V > 2V

augusta

New Member

99RioRedVert

New Member

Hoppy

Hoppy

Firemanz

Only you can prevent Forest Fires!

tarch

My 8V > 4V > 2V

stallion98gt

New Member

Hoppy

stallion98gt

New Member

Hoppy

turbogt

Member

tarch

My 8V > 4V > 2V

1999limitedGT

Similar threads

saleen kit

New Member

My 8V > 4V > 2V

My 8V > 4V > 2V

My 8V > 4V > 2V

New Member

New Member

Only you can prevent Forest Fires!

My 8V > 4V > 2V

New Member

New Member

Member

My 8V > 4V > 2V

Similar threads

Privacy & Transparency

Privacy & Transparency