• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

[shift knob] too hot to handle, too cold to hold?

  • Thread starter Thread starter timeless2
  • Start date Start date Mar 30, 2006
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Mar 30, 2006
#1
  • Mar 30, 2006
  • #1

http://www.partshopper.com/shop/item.asp?itemid=29&catid=

I drive my Mustang year 'round, so environment temperature is a concern. I don't want to shift holding a hot piece of metal in the summer, nor do I want frostbite when I grab gears in the winter time. Thanks for your input.
 

jstreet0204

Active Member
Jun 26, 2003
939
0
36
Winston Salem, NC
Mar 30, 2006
#2
  • Mar 30, 2006
  • #2
If it is solid aluminum I am sure it gets hot. I have the hurts t-handle, and it gets hot enough to blister my hand in the summer. I keep a koozy in the car to put over the shifter when I have to park it in the sun.

 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Mar 30, 2006
#3
  • Mar 30, 2006
  • #3
[cough-cough] SISSY [cough-cough]

I have a billet aluminum handle and a vert...it does get slightly hot in open sunlight but not too bad. Winter its no big deal since i wear gloves when i get in and the heater warms things up quickly...
buy it!
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Mar 30, 2006
#4
  • Mar 30, 2006
  • #4
check out MRT's line of knobs. simple but nice
 

04DarkShadowGT

Member
Jan 31, 2004
474
0
17
Fort Wayne, IN
Mar 30, 2006
#5
  • Mar 30, 2006
  • #5
I had one just like that on my old 04 and with my steeda shifter it got hot. Not hot enough to burn or be uncomfortale, but definatly hot.

It was cold in the winter but again not too bad.
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Mar 30, 2006
#6
  • Mar 30, 2006
  • #6
I have that exact knob, it def gets hot in the summer especially if the sun is beating on it (puttin a cloth over it when parked helps) and there is heat soak from the tranny esp if u have an all metal after market shifter. During the winter it gets ice cold and takes a while to warm up from the tranny. I usually wear leather gloves in teh winter though. However I love how it feels when rowing through the gears and it does look awesome.
 

DageonYar

New Member
Jun 15, 2005
48
0
0
Mar 30, 2006
#7
  • Mar 30, 2006
  • #7
Buy yerself a nice pair of driving gloves Problem solved.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Mar 30, 2006
#8
  • Mar 30, 2006
  • #8
I have the same problem with my Steeda shift knob.. But what I do is when it gets HOT in the summer, I just put a baseball hat or a rag over it. That'll keep it from getting AS hot, but then you still need to get something esle to grab onto it with in these dang Arkansas Summers

I learned my lesson the hard way in the summer. I put the knob on and let it sit outside in the hot heat for about 3-4 hrs. Came out, drove it around and didn't pay attention.. Then I felt something burning the crap outta me and I had the GT logo branded into my palm

Just keep something in the car that you can put over it and will allow you to shift without getting in the way and you'll be good to go.
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Mar 30, 2006
#9
  • Mar 30, 2006
  • #9
jstreet0204 said:
If it is solid aluminum I am sure it gets hot. I have the hurts t-handle, and it gets hot enough to blister my hand in the summer. I keep a koozy in the car to put over the shifter when I have to park it in the sun.

Click to expand...

Cool. Then when you get home, the koozy can be taken straight to the fridge…

droptopponynj said:
I have a billet aluminum handle and a vert...it does get slightly hot in open sunlight but not too bad. Winter its no big deal since i wear gloves when i get in and the heater warms things up quickly...
buy it!
Click to expand...

Good input, especially coming from a vert owner—the sun pounds directly on the hardware.
I wear leather gloves in the winter time as well.
Between the heater and the transmission, I think fall and winter are going to be fine. It’s the summer I am worried about.

helty said:
check out MRT's line of knobs. simple but nice
Click to expand...
I will, but I am going for upgrading my interior identically to the IUP package.

04DarkShadowGT said:
I had one just like that on my old 04 and with my steeda shifter it got hot. Not hot enough to burn or be uncomfortale, but definatly hot.

It was cold in the winter but again not too bad.
Click to expand...

Thanks!

CatmanJJ said:
I have that exact knob, it def gets hot in the summer especially if the sun is beating on it (puttin a cloth over it when parked helps) and there is heat soak from the tranny esp if u have an all metal after market shifter. The winter it gets ice cold and takes a while to warm up from the tranny. I usually weather leather gloves in teh winter though. However I love how it feels when rowing through the gears and it does look awesome.
Click to expand...

I was waiting for some Mach brethren to chime in.

I do have a Pro 5.0, so heat soak was a prime concern, let alone the sun beating down on it in the summer. As I said above, I have gloves and winter is not a huge concern—it’s the branding of the shift pattern my palm could receive on a 90+ day I’m worried about!

DageonYar said:
Buy yerself a nice pair of driving gloves Problem solved.
Click to expand...

I have some winter gloves, but may need to pick up some summer ones as well. Know of any good pair that might be adequately vented?

jasonh_86 said:
I have the same problem with my Steeda shift knob.. But what I do is when it gets HOT in the summer, I just put a baseball hat or a rag over it. That'll keep it from getting AS hot, but then you still need to get something esle to grab onto it with in these dang Arkansas Summers

I learned my lesson the hard way in the summer. I put the knob on and let it sit outside in the hot heat for about 3-4 hrs. Came out, drove it around and didn't pay attention.. Then I felt something burning the crap outta me and I had the GT logo branded into my palm

Just keep something in the car that you can put over it and will allow you to shift without getting in the way and you'll be good to go.
Click to expand...

Here's the kicker now, so I should have mentioned this earlier. 99% of the time, my car is in the garage at work or in the garage at home. I am now thinking the heat in the summer won't be enough to counteract the eye pleasing effect of it.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Mar 30, 2006
#10
  • Mar 30, 2006
  • #10
It never was a big deal to me. I love my Steeda knob, so I dealt with the heat every now and then. My car was usually parked inside the garage as well, but on the days when I went out to town and had to park in parking lots and stuff was just not a pleasant greeting grabbing onto the hot shift knob if I hadn't remembered to put something on it. haha
 

DageonYar

New Member
Jun 15, 2005
48
0
0
Mar 30, 2006
#11
  • Mar 30, 2006
  • #11
http://www.onsitedeals.com/gloves/fingerless gloves01.asp
 

gtstangau

Member
Jan 9, 2006
133
0
16
Alabama
Mar 30, 2006
#12
  • Mar 30, 2006
  • #12
Yeah my car came with that knob when I bought it, that bad boy gets blistering hot in the Alabama heat! It has branded the gears into my palm. Plus when I held it for awhile my hand will get sweaty and start to slip of during shifts. I have the CDC T-handle on it now have not had it during the summer yet but it is definatly easier to grab hold of.
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Mar 30, 2006
#13
  • Mar 30, 2006
  • #13
DageonYar said:
http://www.onsitedeals.com/gloves/fingerless gloves01.asp
Click to expand...

Thanks!

gtstangau said:
Yeah my car came with that knob when I bought it, that bad boy gets blistering hot in the Alabama heat! It has branded the gears into my palm. Plus when I held it for awhile my hand will get sweaty and start to slip of during shifts. I have the CDC T-handle on it now have not had it during the summer yet but it is definatly easier to grab hold of.
Click to expand...
Hmm, hadn't thought about the sweat aspect and slipping off the knob during spirited driving. Good point, but some driving gloves should counteract this effect.

I'm shooting for getting the interior to look like the IUP, as these mods will help resale value a bit: it was an added option at point of sale, so it cannot hurt to add it after the fact.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Mar 30, 2006
#14
  • Mar 30, 2006
  • #14
DageonYar said:
http://www.onsitedeals.com/gloves/fingerless gloves01.asp
Click to expand...
Oh yeah those are some MJ type Beat It/Billie Jean gloves I do think you are required to be atleast 55yrs old and have at the minimum a Corvette but preferrably a Lambo/Porshe/Ferarri to own those.
 

Mach1Run

New Member
Jun 25, 2004
333
2
0
Wylie, Texas
Mar 30, 2006
#15
  • Mar 30, 2006
  • #15
hah in the winter its like holding an ice cube and in the summer its hot enough to be painful unless you cover it while parked.
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Mar 30, 2006
#16
  • Mar 30, 2006
  • #16
Greensix said:
hah in the winter its like holding an ice cube and in the summer its hot enough to be painful unless you cover it while parked.
Click to expand...

U couldn't have just said to my post.
 

DCjuggalo

Member
May 18, 2003
169
0
16
Charlotte, NC
Mar 30, 2006
#17
  • Mar 30, 2006
  • #17
they dont look that great, especially if u have to have cold hands in the winter and get burned in the summer. lol
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Mar 30, 2006
#18
  • Mar 30, 2006
  • #18
DCjuggalo said:
they dont look that great, especially if u have to have cold hands in the winter and get burned in the summer. lol
Click to expand...
I respect your opinion, but I like it better than the faux leather stock piece and my goal is to appear as though my 2004 came with the IUP package.
 

DCjuggalo

Member
May 18, 2003
169
0
16
Charlotte, NC
Mar 30, 2006
#19
  • Mar 30, 2006
  • #19
hey its your hands man ;P
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
Mar 30, 2006
#20
  • Mar 30, 2006
  • #20
have that same one. Not too hot in summer. Really cold in winter tho. buy some goves to drive in. Looks vs pain LOOKS > pain suck it up
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
M
Engine Oil, Smoke, Fire And Brimstone.
  • my5.0isanogo
  • Sep 9, 2017
  • Fox 5.0 Mustang Tech
Replies
5
Views
3K
Fox 5.0 Mustang Tech Sep 9, 2017
my5.0isanogo
M
Taurus Fan And Fal 33054 Install On A Fox
  • No.11
  • Oct 4, 2016
  • Fox 5.0 Mustang Tech
Replies
8
Views
5K
Fox 5.0 Mustang Tech Oct 11, 2016
MFE92
Z
  • Locked
Expired Wheels/tires For Trade Or Sale, Want To Trade For Stocks+cash
  • Z06THIS
  • Mar 10, 2016
  • Wheels Tires Brakes
Replies
0
Views
2K
Wheels Tires Brakes Mar 10, 2016
Z06THIS
Z
Z
  • Locked
Expired Want To Trade Wheels/tires For Stocks+cash, Good Deal!
  • Z06THIS
  • Mar 10, 2016
  • S197 Mustangs For Sale (2005-14)
Replies
0
Views
2K
S197 Mustangs For Sale (2005-14) Mar 10, 2016
Z06THIS
Z
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?