• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Slow leak in tire...

  • Thread starter Thread starter SunburstGoldGT
  • Start date Start date Aug 24, 2004

SunburstGoldGT

New Member
Dec 17, 2003
133
0
0
Blacksburg, VA
Aug 24, 2004
#1
  • Aug 24, 2004
  • #1
I have noticed that over the past couple of months i have a slow leak in my drivers side rear tire, it will fall to about 20 psi and then stop leaking, i havent had time to think much about it lately, i have just been putting air in it about once a week and forgetting about it. Could i just lower the pressure and put a can of fix a flat in it or something? Anyone have a better suggestion? Like i said it drops about 12 psi a week then it hits 20 psi and stops. Thanks in advance.

B
 

StygianStang

New Member
Oct 8, 2003
97
0
0
NORTH ILLINOIS
Aug 24, 2004
#2
  • Aug 24, 2004
  • #2
I had the same problem. And i did exactly that, fix a flat. i have yet to put air in it again. That was a month ago.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Aug 24, 2004
#3
  • Aug 24, 2004
  • #3
if u do decide to go w. fix-a-flat, make sure that you check to make sure the slow leak isnt coming from the valve stem. You may want to pull the tire off the car, air it up and cover it in soapy water to look for a hole in the side-wall or tread. I also wouldnt plan on driving a car too hard w. fix-a-flat in one of the tires.
 

stang976

New Member
Apr 13, 2004
853
0
0
Westchester, NY
Aug 24, 2004
#4
  • Aug 24, 2004
  • #4
i dont like fix a flat too much, but it does work... if you do use it, make sure that you drive around for a while right after you put it in to make sure that it gets spread evenly around the inside of your tire and it does not just clump up on one side. i would check for a nail in your tire, or even a leaky valve stem before i resort to the "poor man's tire plug" (fix-a-flat)
 

SunburstGoldGT

New Member
Dec 17, 2003
133
0
0
Blacksburg, VA
Aug 24, 2004
#5
  • Aug 24, 2004
  • #5
Alright ill spray it down with soapy water after work tonight and see if i see anything, i checked the tread already and nothing, but yeah i know fix a flat isnt perfect but its in my budget at the moment, thanks for the info guys.


B
 

wms004

Founding Member
Jan 15, 2002
2,864
2
49
Los Angeles
Aug 24, 2004
#6
  • Aug 24, 2004
  • #6
take it to a tire specialist.. if theres a good size leak they can patch it.
 
G

geegee

Founding Member
Oct 21, 2000
2,015
0
0
near Oklahoma City, OK
Aug 24, 2004
#7
  • Aug 24, 2004
  • #7
SunburstGoldGT said:
Alright ill spray it down with soapy water after work tonight and see if i see anything, i checked the tread already and nothing, but yeah i know fix a flat isnt perfect but its in my budget at the moment, thanks for the info guys.
B
Click to expand...

Soap may not work for a very slow leak because its difficult to see a difference between natural soap bubbles and and one thats bubbling up. Fine for a bad leak but not so reliable for a small one.

Dismount the tire and take to a tire shop for a dip in their immersion tank. This is a lot more reliable. Since you dismount and take to them the cost is lower than if you drive in and ask them to do the job. Have them fix the tire if bad.

Your problem could be the tire, the bead seal, the rim, the valve stem. Any of these can be a problem to find.
 

Stang_Dawg

New Member
Aug 7, 2004
24
0
0
Atlanta, GA
Aug 24, 2004
#8
  • Aug 24, 2004
  • #8
I've heard bad things about the fix-a-flat stuff. I think it's quite flamable. I'm not really sure what other problems it causes, but you should check with your tire expert and talk with him about it.
 
S

SilverBullet00

New Member
Jul 5, 2004
1,150
0
0
Wichita, KS
Aug 24, 2004
#9
  • Aug 24, 2004
  • #9
If you use fix-a-flat and then take it somewhere they will not be happy. If you have ever pulled off a tire and had to deal with that gunky crap all over the rim and tire, you wouldnt be happy either. If there isnt any bubbles off the soap and water take it to the shop and have them re-seal the tire and get a new valve steam ($20). Just my .02....

You should never use fix-a-flat
 

SunburstGoldGT

New Member
Dec 17, 2003
133
0
0
Blacksburg, VA
Aug 24, 2004
#10
  • Aug 24, 2004
  • #10
Alright guys i sprayed it and i cant see anything, i rotated it so i got all of the tread and everything including the backside, and i agree about fix a flats pain in the butt factor, ive used it on lawnmowers a bunch. I guess ill just take it to a tire place and let them look at it, thanks for all the help.

B
 
You must log in or register to reply here.

Similar threads

C
98 gt fuel pressure issues
  • chasecollier1984
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
93
SN95 4.6L Mustang Tech Jun 2, 2026
chasecollier1984
C
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
176
1996 - 2004 SN95 Mustang -General/Talk- Yesterday at 4:50 PM
mnky99
M
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
926
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
145
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
718
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?