Some new parts

Well, I decided that my car needed some new parts. So I have started collecting some stuff.

I got rid of the ZEX nitrous kit I had. It hit very well, but I was just wanting to next best thing. So Clay at Nitrous Express hooked me up with their 2v plate kit.


I also decided to go ahead and build the rear end in my car. I decided to go with FRPP 4.10 gears, and their 31 spline cobra differential w/ upgraded clutches. Mike @ QMM has hooked me up with a pair of Moser 31 spline axles, and a UPR differential girdle. The axles will be here later this week.




The clutch in my car decided to go out on my right before I left for New York. I plan on swapping to a built 4R70W in the near future, so I opted for a used clutch and flywheel set up. I definitely got a steal on this set up. It's a Centerforce Dual Friction clutch and Fidanza billet steel flywheel. Both the flywheel and clutch have around 10k miles on them.




Once the axles come in, I will post up pictures. I have a few other parts that I will be ordering very soon, but that will be kept a secret for the time being.

Thanks Tim,

I have done a lot of reading on the CF DF clutch and everyone really seems to love them. Plus I got the clutch and flywheel for $250, so I couldnt pass that up.

I'm pretty excited to see how it pulls with the 4.10's on spray. Especially with the other parts I was telling you about in the PM, I hope it runs good.

Speaking of your 1/4 vs my 1000ft times, what was your 1000ft time in that 11.54 run? What kind of 60ft did your car cut on that pass?

Damn son, 1.58 60ft, that's movin out! You wouldnt happen to have any video's would you?

d98gt said:

Sounds about right as on my 11.8 pass I ran a 9.94; cars are moving pretty good

I'll be adding the bottle to my car next week

Click to expand...

Definitely ready to see that car of your's on the bottle. Should be nasty.

Those were some good passes Tim, I am going to try and get these parts put on this week and get out to the track this weekend.