• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Spark Plug Change

  • Thread starter Thread starter Silvergto2
  • Start date Start date Aug 4, 2005

Silvergto2

Member
Jun 8, 2005
179
1
16
UTAH
Aug 4, 2005
#1
  • Aug 4, 2005
  • #1
I was wondering if anyone knew of a website or had something written up on how to change the spark plugs in an 02 gt? Also what all tools would I need?
 
S

SilverBullet00

New Member
Jul 5, 2004
1,150
0
0
Wichita, KS
Aug 4, 2005
#2
  • Aug 4, 2005
  • #2
Here is a pretty good "how-to".
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Aug 4, 2005
#3
  • Aug 4, 2005
  • #3
http://www.bullittarchive.com/html/modules/articles/article.php?id=83

best writeup i've found... just one thing... i did not use the antiseize and know of a lot of people that dont... its a give and take if its needed or not, and if its related to spark plug blow out... jury is still out, but the main thing that you need to do is that before you remove the COP, is to REALLY blow out the area with compressed air or an air complresser. i did not do it on the first one i pulled and though i didnt see anything get into the chamber... there was a bit of possible thing to get in there..

i did NOT use and swivels, but extensions are a must... swivels DO help with assorted length of extensions.

Torinalth
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Aug 4, 2005
#4
  • Aug 4, 2005
  • #4
I'd highly recommend anti-seize. I followed the Bullitt Archive write up - it's excellent. And even though I used tons of compressed air, there still seemed to be 'grit' (for lack of a better description) on the threads. So, what I did was smear a bit of anti-seize on the old plug and run it down by hand until I hit resistance. Then I backed it out, cleaned the threads, gave it more anti-seize and repeated this process until I could run it all the way down by hand. Then I installed the new plug. It was a time consuming process, but, IMO, worth it. With these aluminum heads, cross threading is a real concern.
 
You must log in or register to reply here.

Similar threads

P
Resolved Spark plug location
  • Ptanner
  • May 17, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
1
Views
254
2024+ (S650) Mustang -General/Talk May 18, 2026
Ptanner
P
For Sale Fox BRAND NEW Motorcraft spark plugs, wires and hood prop rod clips
  • Ricomondo
  • Sep 6, 2026
  • Engine and Power Adder
Replies
0
Views
258
Engine and Power Adder Sep 6, 2026
Ricomondo
J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
197
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
613
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
682
SN95 V6 Mustang Tech Sep 29, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?