Steeda under drive pulleys and install...

S

spudd001

New Member

Mar 29, 2007

1

0

0

May 18, 2007

#1

• May 18, 2007

• #1

I have a reputable shop here locally and they want to sell me Steeda under drive pulleys and the install for $300 out the door, or just the pulleys for $200. Is there a noticeable difference in power with the pulleys and is $100 reasonable for the install? I put some on a 93 GT about 7 years ago. I am trying to decide if it would be worth it just to pay someone else do it to avoid headache. What do you think?

 

C

chubhunter

New Member

Apr 1, 2007

63

0

0

heartland

May 18, 2007

#2

• May 18, 2007

• #2

spudd001 said:

I have a reputable shop here locally and they want to sell me Steeda under drive pulleys and the install for $300 out the door, or just the pulleys for $200. Is there a noticeable difference in power with the pulleys and is $100 reasonable for the install? I put some on a 93 GT about 7 years ago. I am trying to decide if it would be worth it just to pay someone else do it to avoid headache. What do you think?

Click to expand...

I think 100 bucks sounds reasonable but its more fun just to get your hands a little dirty and do it yourself. I just ordered a set, paid 200 bucks for the set as well. When they arrive I'm going to print off the write up from our very own "BIG CAT" for the install and do it myself. And according to Big Cat you can feel the difference. Good luck with which ever way you go.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

May 18, 2007

#3

• May 18, 2007

• #3

yep, the car revs much more quickly now, gives a good SOTP gain. i did not dyno them, but i say its definately worthe the $200. click the link in my signature for the Roush pulleys to see whats involved. its really pretty easy, but you do need some specialty tools that are available to rent from a local auto parts store. the Steeda pulleys require you to replace the stud that is trimmed for the Roush pulleys, but other than that, the install is nearly identical.

$100 is reasonable for installation labor.

 

kooldawg6

mine works really well and can take a fair amount

Aug 31, 2006

1,679

2

38

Central VA

May 19, 2007

#4

• May 19, 2007

• #4

These may be one of my next mods BTW, I love working on my car...to an extent...and this would be one of those times

 

S

spudd001

New Member

Mar 29, 2007

1

0

0

May 19, 2007

#5

• May 19, 2007

• #5

I normally do things myself but I travel for work all the time and Im only home on the weekends. It is much easier to have someone else do it than for me to loose a weekend taking 2-3 hours vs. having some else do it in 1 hour.

 

S

s1roush

New Member

Mar 14, 2007

22

0

0

May 19, 2007

#6

• May 19, 2007

• #6

What shop is it?

 

S

spudd001

New Member

Mar 29, 2007

1

0

0

May 19, 2007

#7

• May 19, 2007

• #7

HPP Racing in Lewisville.

 

S

spudd001

New Member

Mar 29, 2007

1

0

0

May 20, 2007

#8

• May 20, 2007

• #8

I installed the pulleys and I am happy. If I would have had the Impact the whole time it would have been a 1 1/2 hour install, if that. The Balancer bolt was a little more difficult than I thought it would be.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

May 20, 2007

#9

• May 20, 2007

• #9

sweet! give us some feedback on how the car feels now. did you use my write up for the install? did it help? do i need to add anything?

 

S

spudd001

New Member

Mar 29, 2007

1

0

0

May 20, 2007

#10

• May 20, 2007

• #10

I used your installation instructions and the ones that came with the pulleys. The only thing I had a hard time with was unhooking the wires for the fan. I was trying to unhook the wiring before I pulled the fan out. It was really hard to see how or where the plug unhooks at. But then I pulled the fan out about half way and there was enough slack in the wiring to where I could see it the wire really well. After that, I got hung up on the balancer bolt. I like to think I am pretty strong but I could break the damn thing. I drove 30 min to borrow an impact... the job was complete in about another 30 min.

I can feel a little more power down low. Just becuase I can peel longer in first gear starting at a lower rpm. Im glad I made the purchase. Thanks for all your help!

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

May 20, 2007

#11

• May 20, 2007

• #11

cool, glad to help!

 

B

Blu-Steel

Member

Dec 29, 2006

92

0

7

Waynesville, MO

May 21, 2007

#12

• May 21, 2007

• #12

bigcat - thanks for the great write-up. I've been thinking of doing the same install in mine (2007 GT/CS) but I am concerned about how it would effect the charging system. Do you notice any problems at idle, such as dimmer headlights etc...? I put BBK underdrive pulleys in my 1990 Mustang GT several years back and although I did feel a SOTP difference I had charging problems, especially when I ran headlights with winshield wipers.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

May 21, 2007

#13

• May 21, 2007

• #13

i have yet to notice any negative effects from the pulleys. others that have had them longer may have more insight on negative effects than me, but i do not recall reading any on this forum.