I would really like to increase the ability for my car to rev higher/longer and was wondering if anyone had some suggestions as to what a good cam & specs might be? Basically, I want my SC to rev similarly to my '99 S281-NA Cobra (i.e 7000 rpm redline). I'm not looking to make a drag-racer, but I do want to be able to make power for a longer period of time in each gear.
Also, what do you think about the cam specs below? I found and saved them from someone on this forum (I think it was 2002 Saleen S281 #40), but I can remember his results.
The specs are 238/242 degrees of duration at .050". The lift is .550"/.550". The lobe separation is 115 with 5 degrees advance ground in
Any help/suggestions would be greatly appreciated.
Also, what do you think about the cam specs below? I found and saved them from someone on this forum (I think it was 2002 Saleen S281 #40), but I can remember his results.
The specs are 238/242 degrees of duration at .050". The lift is .550"/.550". The lobe separation is 115 with 5 degrees advance ground in
Any help/suggestions would be greatly appreciated.