Taking off upper intake manifold

So I'm trying to do an injector swap in my car. First time I've ever done it so forgive the ignorance. Anyway, took off all the crap that you have to, vaccuum lines, wiring harnesses, TB, etc.... Got four bolts off the upper manifold, and two off the elbow that attaches it. So I think that's it as far as bolts are concerned, but I can't get the manifold to come off and can't figure out what is holding it on there. I'm pretty sure there's nothing below the "5.0 HO" plate, but that's stuck on too, but let me know if there is. Thanks.

Ha, I just figured it out looking in the FAQ. Had to break off the plate though (POS), but I'll just use the one from my T-bird or just get a new intake here pretty soon. Thanks for the help.

Ok, got it done. Wasn't too hard really. Took the TB off just cause I thought I had to before I read this...at least it was out of the way. Good advice about the regulator. Only thing is I've got a fuel pressure guage on there that when I popped the fuel rail off, I bumped the glass on it on the intake and broke it. Still works, but looks like crap. Oh well, it's runnin like a champ.