Progress Thread Therapy Car--Welder Bottle

Olivethefet

Slap me as well as point and laugh
May 17, 2018
1,563
995
123
39
Enterprise AL
Yeah, when the new retainer showed up broke I got impatient and decided to use the old one. Should have know better. Thanks for the advice though. If I ever have to go through the transmission I'll keep what you said in mind!
 
  • Sponsors(?)


Olivethefet

Slap me as well as point and laugh
May 17, 2018
1,563
995
123
39
Enterprise AL
The new retainer for the drive gear came today. I got it installed. There is a black rubber donut thing on the output shaft. What does it do and how is it supposed to be installed?
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
16,320
5,202
193
polk county florida
I found no reference to the 'donut thing' on the output shaft, I looked all through the pages in the resources where it show the disassembly of the t5, maybe another member can help.
 
  • Like
Reactions: Olivethefet

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,213
4,284
203
42
That donut thing acts almost like a seal. Should be on the splines near the bushing. I always slide them towards the rear and let it slide back when installing the tail housing. Not sure if there is a spot for it inside the tail housing. I can't remember.
 

Olivethefet

Slap me as well as point and laugh
May 17, 2018
1,563
995
123
39
Enterprise AL
Off topic question. I know a lot of the guys that seem to peek at this thread have recently bought welders or are good at welding themselves. I want to buy a bottle for my welder. I'm just looking for a small to medium size bottle. What is a good price? I want to start looking on market place, but I'm not up to speed on prices. Thanks in advance for any input.
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
32,844
8,997
224
Massachusetts
Off topic question. I know a lot of the guys that seem to peek at this thread have recently bought welders or are good at welding themselves. I want to buy a bottle for my welder. I'm just looking for a small to medium size bottle. What is a good price? I want to start looking on market place, but I'm not up to speed on prices. Thanks in advance for any input.
This was where I got mine.


I got an 80cf, filled, delivered for $250. Was a brand new tank too.
 

Olivethefet

Slap me as well as point and laugh
May 17, 2018
1,563
995
123
39
Enterprise AL
It's going back together! I got the tailshaft housing back on tonight. The little straps I make make this process pretty easy to do by yourself. Hit me up if you ever need one. The speedometer gear is in the proper place with a new retainer. I need some more automatic transmission fluid to top of the transmission, but that's it.

20200528_210911.jpg
 
  • Like
Reactions: General karthief
Thread starter Similar threads Forum Replies Date
skywalker body work + physical therapy + broken arm = slow progress 1965 - 1973 Classic Mustangs -General/Talk- 3
V Group therapy 2.3L (N/A & Turbo) Tech 0
P Progress Thread My First Project Car And My First Fox 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
Wayne Waldrep Engine Trouble with the old pile...I mean car. Need some help. Fox 5.0 Mustang Tech 7
D How to know if car springs are bad on just shocks? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
Mixveez First car 86 T-Top 4 eye Fox 5.0 Mustang Tech 67
L Raising the car for Subframe connector welding (or other reasons). 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 22
J Start a car club in Lancaster/Palmdalr area Regional Forums and Event Information 0
T Fox Scored a 5 speed feature car with only 67k original miles 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
V A 20 year old car, with many faults! SN95 4.6L Mustang Tech 7
DarkFox I'm a new stangnet member and I am removing the :poo:ty early 90's alarm system in my car. Northeast Ohio failure here. The Welcome Wagon 21
R Car wont start 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
L 1997 Cobra Tune Question (and some background on the car) SN95 4.6L Mustang Tech 3
91GTstroked Engine Gas smell in cabin, car died on highway. Fox 5.0 Mustang Tech 19
5 Electrical Tick when connecting negative terminal to battery. Tick no longer happens but car doesn't start Fox 5.0 Mustang Tech 7
0 Plenty Fuel, No Spark. Car will not start 1996 - 2004 SN95 Mustang -General/Talk- 5
S Electrical Speed Density 02 Harness on Mass air car?? Fox 5.0 Mustang Tech 18
G mustang running rough after car wash 1996 - 2004 SN95 Mustang -General/Talk- 10
C Hi guys i just got a 2003 mustang gt 4.6 how do check kow it the car has pi heads SN95 4.6L Mustang Tech 6
Jason Roberts O2 Simulators put on a 1994 GT 5.0 do they hurt the car or are they useful even though the 94 GT only had 2 O2 sensors and they were before the cats 1994 - 1995 Specific Tech 3
W Progress Thread Car runs poorly over 4500rpm 1994 - 1995 Specific Tech 13
T_Roberts 2 10'' Subs in trunk rattle underneath car SN95 V6 Mustang Tech 8
rabidscoobie Car stumbles at higher RPM's? SN95 4.6L Mustang Tech 12
91GTstroked Engine Mounting map sensor in car? Fox 5.0 Mustang Tech 7
revhead347 Buying Car Parts is somewhat pleasant now 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
jetmech807 Bought a new car. 2015+ (S550) Mustang -General/Talk 10
BP Builds Fox 1989 LX complete restoration - the long slow project car 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
FoxMustangLvr What car parts are you buying with your stimulus check? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 71
D Car is going haywire! Help. 1996 - 2004 SN95 Mustang -General/Talk- 1
F 79 pace car junk yard find plus others 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 22
J 1970 mustang trans am, pro touring, mad max rat rod, hot rod, race car The Welcome Wagon 5
92j3ieje8 Over heating car, and it doesnt stay on. 1996 - 2004 SN95 Mustang -General/Talk- 10
S Fuel 1995 stock Mustang EFI vs aftermarket TBI or Edelbrock injection? Jag Project Car Fox 5.0 Mustang Tech 13
S Microsquirt issue. Car won't start with SPOUT in Digital Self-tuning Forum 8
M New member, from Vancouver metro area and getting back collector cars, in British Columbia if you have a car 25 years old will qualify as a collector The Welcome Wagon 5
awing Debating removing ABS from street car. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
G Electrical A/C added to deleted car questions.... Fox 5.0 Mustang Tech 2
JMGlasgow My car is at the body shop now 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 119
J questions for 2.3 to 5.0 carb swap Fox 5.0 Mustang Tech 5
derek2079 My car's battery keeps draining overnight. 1965 - 1973 Classic Mustangs -General/Talk- 11
N Looking at cars and just dont know 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 18
derek2079 After installing a 195F Thermostat my car runs hotter and I don't like it. What temp should I run? I don't know what temp was in there before? Classic Mustang Specific Tech 9
Brads2000 4.6 town car swap The Welcome Wagon 2
H Car overheating when engine sits at idle SN95 V6 Mustang Tech 6
A New Guy, Old Car The Welcome Wagon 3
M 1972 Car Horns 1965 - 1973 Classic Mustangs -General/Talk- 3
P Exhaust weld failed, is car still safe to drive until I get it repaired? SN95 V6 Mustang Tech 16
Foxbodyguy49 Car is hard to shift when up to temp Fox 5.0 Mustang Tech 26
Similar threads