Track Kills - New times with vids!

gcomfx.com · Apr 7, 2005

Craig's Wagon -

Started the day with a couple of good runs against Craig's mighty wagon. Great running car for the price he gave! Looks mean too for a 351 wagon.

14.28 @ 96.94 vs Craig's 15.42 @ 88.77
60ft was 2.22
14.17 @ 97.11 vs Craig's 15.61 @ 88.76
60ft was 2.20

Good times!

Got the second run on video....

http://www.100mphclub.com/movies/mokancraig_gcomfx.mov 2.4MB

Duggan's 95 GT -

This is a grudge match that's been in the works since I first met Joey. Smack talk had always been one sided too. I finallly got him to put up or shut up. Luckily he didn't have to get divorced, as nothing broke on the car... but it was good times. Multiple races and I ran a personal best N/A against his car when Tony ran it. 14.16 @ 96.98 mph!

14.29 @ 96.75 to Joey's 16.46 @ 88.67
60ft was 2.23
14.53 @ 96.50 to Joey's sideways launching 16.70 @ 84.11
60ft was 2.41
14.16 @ 96.98 to Tony's 15.74 @ 92.76 in Joey's car.
60ft was 2.12

http://www.100mphclub.com/movies/duggan_gcomfx1.mov 2.2MB

http://www.100mphclub.com/movies/duggan_gcomfx2.mov 3.2MB

http://www.100mphclub.com/movies/duggan_gcomfx3.mov 3.3MB

Once he gets his clutch sorted out, I hope we can give it another shot. is always an option for him.

I'm trying to figure out if it was the cat-less H (still not fitting right yet) or the new O2s that gave me almost a 3 mph better trap speed.

gcomfx.com · Apr 7, 2005

BTW - I'll update my sig later. No point in people asking what I ran before the H and O2s.

Dan95-5.0 · Apr 7, 2005

sweet man. getting the vids now.

13's are around the corner.

how do you launch you car with the high stall? still using street tires right?

congrats.

95Vert · Apr 7, 2005

Have the same questions as Dan. What were your 60s? You probably would've cracked the 12s with the 125 shot. Congrats, yet ANOTHER reason to get the 3000 stall.

SN95StangMan · Apr 7, 2005

Nice. Havent seen you around in a while Paul. Check the sig for my new times. \/ \/

I have video of that run too, but my friend got it on regular 8mm tape and I cant seem to play it on my digital 8mm camrea.

gcomfx.com · Apr 7, 2005

Dan95-5.0 said:
sweet man. getting the vids now.

13's are around the corner.

how do you launch you car with the high stall? still using street tires right?

congrats.

I'm still learning. I had my old stall figured out to the T. Now it's tougher. The bad 60fts above are from idle then WOT.

The best times were from idle as well, but hitting 75% throttle then mashing it down 10-15 ft out.

The Mid runs were from holding the brake and stalling up to about 2,600 - I never seem to have enough time to get it on up to 3,000 - I have to pump my brake pedal once to get it to hold that much and I only try that when the other guy takes to long at the tree.

Oh, and yeah, these are still the same Esennza street tires from AFSWheels. I haven't even rotated them front to back yet.

Reason I haven't been on in a while. I got a new job. WAY TOO MANY HOURS - salary sucks cause I'm giving away my life right now. But the potential is there.

That and I've been really sick over the past month and a half.

If you guys want to see our club calendar I finished since the last time I posted here, there are pics of each month in this thread: http://www.100mphclub.com/phpBB2/viewtopic.php?t=4442

gcomfx.com · Apr 7, 2005

SN95StangMan said:
Nice. Havent seen you around in a while Paul. Check the sig for my new times. \/ \/

I have video of that run too, but my friend got it on regular 8mm tape and I cant seem to play it on my digital 8mm camrea.

Wow... those are amazing times. What tires?

My best 1/8 run so far is a 9.07 @ 77.20 with a 2.12 60ft.

I've got a used 6AL waiting to be installed, new Taylor wires, and I'm going to add the timing adjuster so I can switch to the juice easier and back it down during a run if I need to. Our track rental day is coming up. May 21st, so I better get with it.

SN95StangMan · Apr 7, 2005

gcomfx.com Reason I haven't been on in a while. I got a new job. WAY TOO MANY HOURS - salary sucks cause I'm giving away my life right now. :bang: But the potential is there. That and I've been really sick over the past month and a half. :notnice: [/QUOTE said:
That sucks. Hope everything gets better.

SN95StangMan · Apr 7, 2005

gcomfx.com said:
Wow... those are amazing times. What tires?

My best 1/8 run so far is a 9.07 @ 77.20 with a 2.12 60ft.

I've got a used 6AL waiting to be installed, new Taylor wires, and I'm going to add the timing adjuster so I can switch to the juice easier and back it down during a run if I need to. Our track rental day is coming up. May 21st, so I better get with it.

Street tires.

They are Goodyear Eagle F1 GS-D3's @ about 25psi. 275/35/18

I get my best launches by bringing it up to 1500 rpm. no more, no less. I figure i could get even better 60' times by getting some drag radials and launching at a higher rpm.

My new goal is to reach an 8.4 in the 1/8th with stock gears.

Dan95-5.0 · Apr 7, 2005

wow. thats a good 60ft with those F1's.

once i get the converter in, i'm going to the track and try those launching methods.

thanks

gcomfx.com · Apr 7, 2005

Anyone WATCH the vids yet?

WhiteDevil · Apr 7, 2005

gcomfx.com said:
I'm trying to figure out if it was the cat-less H (still not fitting right yet) or the new O2s that gave me almost a 3 mph better trap speed.

I can tell you it wasnt the 02 sensors because they dont do anything at WOT your computer runs off of set fuel and spark tables.

gcomfx.com · Apr 7, 2005

Good call... guess I wasted $100. It doesn't idle any better, and it still surges. 172,000 miles on the old sensors and they act just like new ones.

mootang · Apr 7, 2005

is there a reason that the other stang is soo slow???

Stangfreak95 · Apr 7, 2005

mootang said:
is there a reason that the other stang is soo slow???

gcomfx.com · Apr 8, 2005

A buddy drove it that last run, the best run... said the clutch was really misadjusted. He could at least launch it. The owner was a tire spinning fool.

The car has a rebuilt motor in it. Only 50 miles on it actually. It goes to car shows and is trailered most of the time. LOL

Joey is a kewl guy, but talks ALOT of smack. Took me a couple hours to get him on the track. Sure was great to outrun him like that.

mystang94gt · Apr 8, 2005

Still no 13's NA paul? Man I am so disappointed in you! JK bro

Looks like you are knocking on the door though. Time to go gets some 12's on the juice. I MIGHT have some new times this month. Deciding whether or not I want to run my car on 4/30 at Mustang Madness. My goal before was 13.9 but now a 14.15 will be enough to make me happy

302fordracer · Apr 8, 2005

underdrive pulleys

got my new underdrive pulleys in the mail today...going to put them on next friday my next day off but I am going to go ahead and throw em into the sig now...any guesses on what my car will run this spring at the track...?

302fordracer · Apr 8, 2005

what the heck I posted that under "new thread" and it showed up here...lol stangnet woas I guess..

gcomfx.com · Apr 11, 2005

mystang94gt said:
Still no 13's NA paul? Man I am so disappointed in you! JK bro

Looks like you are knocking on the door though. Time to go gets some 12's on the juice. I MIGHT have some new times this month. Deciding whether or not I want to run my car on 4/30 at Mustang Madness. My goal before was 13.9 but now a 14.15 will be enough to make me happy

Bringit! I've got a few more little toys to put on. Going to try and get it all installed and back on the juice for the 21st of May. It's my club's track rental day.

Track Kills - New times with vids!

gcomfx.com

gcomfx.com

Dan95-5.0

Active Member

95Vert

New Member

SN95StangMan

New Member

gcomfx.com

gcomfx.com

SN95StangMan

New Member

SN95StangMan

New Member

Dan95-5.0

Active Member

gcomfx.com

WhiteDevil

New Member

gcomfx.com

mootang

New Member

Stangfreak95

add a 4

gcomfx.com

mystang94gt

New Member

302fordracer

New Member

302fordracer

New Member

gcomfx.com

Track Kills - New times with vids!

Active Member

New Member

New Member

New Member

New Member

Active Member

New Member

New Member

add a 4

New Member

New Member

New Member

Privacy & Transparency

Privacy & Transparency