track results part 2

[Swarzkopf]

Those ET Drags are awesome tires. You'll hook like mad with those.

sticky tires and 2.73 don't get along your asking for a big bog out of the hole.

I agree, but I think that with ET Drags he should be able to come out of the hole on the nitrous and that should help just a litte bit with the bogging.

 

[94gts]

if u see mt other post i am probably goin with the et street radial for the occasional street use and it is tubeless

 

[Swarzkopf]

Not going to grip as good as ET Streets or Drags, but drag radials are a big improvement over regular tires. I don't know much about the MT drag radials though.

I've used Nittos and BFGs. The BFGs give AWESOME traction when treated right. I've only been to the track once, and cut a best 1.8 60' with my AODE car.

 

[IM_FASTER_THAN_]

If It Makes You Feel Any Better I Was Down At The Track Last Weekend And My Sixy Foot Times Were Just Under The 3 Sec Mark But I Still Ran 13.55. We Were Also Running In 37 Degree Weather. Drop Ur Sixty Foot Time And Your Mph Will Go Down To. I Know You Didnt Want To Hear That But I Just Thought I Would Let You Know.

 

[94gts]

If It Makes You Feel Any Better I Was Down At The Track Last Weekend And My Sixy Foot Times Were Just Under The 3 Sec Mark But I Still Ran 13.55. We Were Also Running In 37 Degree Weather. Drop Ur Sixty Foot Time And Your Mph Will Go Down To. I Know You Didnt Want To Hear That But I Just Thought I Would Let You Know.

WRONG LOL!!

2.1 sixty foots equaled 13.0@110

 

[gmkillr]

W/ the power your making you can easily cut 1.9 60' times w/ those khumo's
In full street trim before the blower I ran a 1.90 60' time on my way to a 13.30 @ 103.5 on 245/45/17 khumo ectsa's
Just practice and go nice and easy and ride the clutch out of the hole. Good luck!!