• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

transmission ?

  • Thread starter Thread starter Too Slow
  • Start date Start date Feb 29, 2004
T

Too Slow

New Member
Jan 23, 2004
209
0
0
Houston, TX
Feb 29, 2004
#1
  • Feb 29, 2004
  • #1
ok i need to change the oil on my 2002 automatic GT but don't know to much about it. i don't think there is a drain plug, but i'm not sure. does anyone know how hard this is? should i just pay to have it done? and what all do i need when doing this?
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Feb 29, 2004
#2
  • Feb 29, 2004
  • #2
Too Slow said:
ok i need to change the oil on my 2002 automatic GT but don't know to much about it. i don't think there is a drain plug, but i'm not sure. does anyone know how hard this is? should i just pay to have it done? and what all do i need when doing this?
Click to expand...

You will need 12 qts of Mercon V automatic transmission fluid and a transmission filter. I recommend motorcraft for both of theese as their inexpensive compared to other brands and meet the requirements for your vehicle.

You can do this one of two ways. One, you can drain the fluid through the pan by taking the pan off. Best way to do this is by loosening most of the bolts that hold the pan to the transmission and let it hang somewhat on one side. That will allow the fluid to drain out of one side and make it easier to catch. Once the flow slows down, you then just finish taking the pan off and dumping the rest into the catching container. Then, clean the pan and replace the filter. The filter isnt held in by any screws or clamps so that shouldnt be a problem.

The other way is to loosen the transmission line from the radiator and dump the hose into the container. Next, start the car and let it idle and be sure not to give it any gas. When the car starts, the transmission pump will pump and since the line is open, all the fluid will flow out the line and into the pan. Once the fluid stops flowing, immediately shut the car off. If it runs too long with no fluid flowing through the transmission pump, the transmission pump can suck in air and end up prematurely failing. Once you got all the fluid out and the car shut off, just drop the pan, clean it, and replace the filter.

When replacing the pan, simply tighten each of the bolts down to 90in/lbs. of torque and then refill the transmission through the dipstick tube in the engine bay. You may need a small funnel to accomplish this.
 
T

Too Slow

New Member
Jan 23, 2004
209
0
0
Houston, TX
Feb 29, 2004
#3
  • Feb 29, 2004
  • #3
cool thanks you answered everything. if i have anything else i'll ask.

thanks alot
 
0

00gtconv

Founding Member
Oct 25, 2002
516
0
0
Feb 29, 2004
#4
  • Feb 29, 2004
  • #4
Trans oil

You need to change your filter.
Alot of people simply flush their systems without changing the filter; big mistake.
You should have seen the junk in my pan and filter when I finally dumped the pan.
Have it done, by a trans shop and bring the right oil with you(they wont take offence when it comes to ford fluids). Call around I get mine done for $50.
 
T

Too Slow

New Member
Jan 23, 2004
209
0
0
Houston, TX
Feb 29, 2004
#5
  • Feb 29, 2004
  • #5
i have another question, my friend told me that i only need to buy like 6 quarts because of all the fluid still in the torque converter, so do i buy 6 or 13 like my owner's manual says.
 
S

Silver95Bird

Founding Member
Jan 11, 2002
50
0
0
PA
Mar 1, 2004
#6
  • Mar 1, 2004
  • #6
120 in-lbs for the pan bolts. 90 in-lb are the valve body bolts (which you wont need to touch for this)
 
You must log in or register to reply here.

Similar threads

Proper Transmission fluid for a 84nwc t5
  • Sask84gt
  • Mar 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
546
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 10, 2026
Sask84gt
S
S302 Saleen supercharger help
  • sschoup
  • Nov 19, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
2
Views
346
2015 - 2023 (S550) Mustang -General/Talk Nov 19, 2025
sschoup
S
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
7
Views
303
SN95 V6 Mustang Tech Jul 24, 2026
gkomo
H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
311
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
97
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?