Ok
Today I bit the bullet and went to mustangs Un(limited) and bought the Tremec TK600 with the .64 overdrive 26 spline input shaft and 31 Spline output shaft. I was originally going to buy the world class T5 but Mustang "Limited" had the tranny on backorder for the last month and I cant wait that long to finish my New engine swap.
Now my main question is will my FRPP Aluminum drive shaft work with the Tremec? I did buy the new yoke to replace the one on the drive shaft.
2.Do I have to adjust the shift lever base (flip the shifter 180 Degrees) in order for it to fit right and be in the same location as the T5, or should I just leave it alone the way it is? 3. Since im giong from a stock T5 in my 93 GT with 3.55 rear end gear to a TKO600 what will the car drive like? With the .64 5th Overdrive gear will i notice a good drop in RPMS while curiseing on the highway at 75 MPH as a pose to the stock T5 overdirve. Does anyone know of a good RPM Calculator on the web?
Any info would be awsome becuase im planing on dropping the new 350 HP 306 in on monday or tuesday once my clutch arrives. Thanks Guys!!!
Today I bit the bullet and went to mustangs Un(limited) and bought the Tremec TK600 with the .64 overdrive 26 spline input shaft and 31 Spline output shaft. I was originally going to buy the world class T5 but Mustang "Limited" had the tranny on backorder for the last month and I cant wait that long to finish my New engine swap.
Now my main question is will my FRPP Aluminum drive shaft work with the Tremec? I did buy the new yoke to replace the one on the drive shaft.
2.Do I have to adjust the shift lever base (flip the shifter 180 Degrees) in order for it to fit right and be in the same location as the T5, or should I just leave it alone the way it is? 3. Since im giong from a stock T5 in my 93 GT with 3.55 rear end gear to a TKO600 what will the car drive like? With the .64 5th Overdrive gear will i notice a good drop in RPMS while curiseing on the highway at 75 MPH as a pose to the stock T5 overdirve. Does anyone know of a good RPM Calculator on the web?
Any info would be awsome becuase im planing on dropping the new 350 HP 306 in on monday or tuesday once my clutch arrives. Thanks Guys!!!