I was looking through the feb 2005 5.0 mustang and superfords mag and saw an ad for pro topline cylinder heads. the website is www.tristatecylinderhead.com i was wondering if anyone had ever dealt with them. it says in there ad, "aluminum racing heads $550 a set". there site has another set for 800. these are the specs.
60cc Combustion Chamber
200cc Intake Runners
3/8" Screw-in Studs & Guide Plates
Phosphor Bronze Valve Guides
Stainless 2.055" Intake Valves
Stainless 1.600" Exhaust Valves
Performace Springs Good To .600" Hyd. Flat Tappet
*140 psi @ 1.800" (closed)
*340 psi @ 1.258" (open)
just lookin for some input and asking if they would work with a stock bottom end. thanks everybody.
Nick
60cc Combustion Chamber
200cc Intake Runners
3/8" Screw-in Studs & Guide Plates
Phosphor Bronze Valve Guides
Stainless 2.055" Intake Valves
Stainless 1.600" Exhaust Valves
Performace Springs Good To .600" Hyd. Flat Tappet
*140 psi @ 1.800" (closed)
*340 psi @ 1.258" (open)
just lookin for some input and asking if they would work with a stock bottom end. thanks everybody.
Nick