Trick Flow Box R Intake

90BlueGTStang · May 13, 2012

Has anyone tried this swap on their Fox yet? It was in a recent issue of 5.0 Mustang and Super Fords. If you have, I want to hear some personal feedback about this swap.

rbonella · May 13, 2012

What? Bolting on their box intake? Sure. Guy in my club runs the intake. We un-bolted his old edie intake and bolted on the TFS box intake. Made 8 hp more on his blown 347....and that's the story

90BlueGTStang · May 13, 2012

Wow lol. In the magazine, they said that it was a 67 hp gain lol.

srtthis · May 14, 2012

90BlueGTStang said:
Wow lol. In the magazine, they said that it was a 67 hp gain lol.

mag numbers = highest change in the curve...
most peoples numbers when you ask = peak numbers

me personally id rather see the both curves and go from there

Gearbanger 101 · May 14, 2012

90BlueGTStang said:
Wow lol. In the magazine, they said that it was a 67 hp gain lol.

Depends what kind of engine it was bolted to and the other combination of parts it had and what kind of intake it was replacing. Just throwing out horsepower figures tells nothing?

Gregg@TFS · May 14, 2012

90BlueGTStang said:
Wow lol. In the magazine, they said that it was a 67 hp gain lol.

The article you read was on the 408 Clevor build. They swapped the standard R series intake to the Box R. Those numbers are legit. On that combination the Box R intake was much better suited, expecially with the spray.

srtthis · May 14, 2012

Gregg@TFS said:
The article you read was on the 408 Clevor build. They swapped the standard R series intake to the Box R. Those numbers are legit. On that combination the Box R intake was much better suited, expecially with the spray.

cleavor motors make my pants tight

NIKwoaC · May 14, 2012

srtthis said:
cleavor motors make my pants tight

+1, and kudos to Trick Flow for reinventing the wheel on that one!

tannerc91gt · May 16, 2012

if i read your other thread correctly, you have a bone stock 302. I'd highly recommend staying away from this intake until you've built a motor that requires it. you wont be happy with the results.

if you were just curious about other people using it, carry on

Trick Flow Box R Intake

90BlueGTStang

Member

rbonella

Member

90BlueGTStang

Member

srtthis

the guy doing it does every local racers rear end

Gearbanger 101

Straight Outta Locash

Gregg@TFS

srtthis

the guy doing it does every local racers rear end

NIKwoaC

中國製造

tannerc91gt

This last 25% is foreign territory at this point

Similar threads

Trick Flow Box R Intake

Member

Member

Member

the guy doing it does every local racers rear end

Straight Outta Locash

the guy doing it does every local racers rear end

中國製造

This last 25% is foreign territory at this point

Similar threads

Privacy & Transparency

Privacy & Transparency