Vacuum Question

Skoobie said:

I know, Im a disgrace to the 5.0 community I do have a chiltons but I wasent sure what the IAC was?(acronym) But im learning. Thanks for everyones help and patience, somewhere down the line I'll impart the knowledge on some other newbie Anyway I'll try cleaning it out tomarrow and let you know the results. Night all!

Click to expand...

stop that! you are doing a great job. for future ref, as im sure you figured, IAC and IAB are used almost interchangably (C= control; B=bypass). just in case you run into one or the other.

good luck.

yep, that is how it goes.

not sure what you mean about the connector??

if you reset the KAM, it might learn a little quicker (might help with the hunting you are seeing right now).

good luck.

The adaptive strategies of the computer are pretty amazing. Mine had a spat of wanting to idle down a couple of months ago. Did it a few times on a cold start - would act like it wanted to die and then the iab would catch it and speed it back up. It'd do that a time or two over 15 seconds or so, and then idle fine. Well, when it would try to die, I'd step on the gas. What I finally tried was, NOT stepping on the gas. I figured that after a while of the computer having to 'catch' it, it would learn. Sure enough, about 4 starts later, it was back to cranking right up and settling right into the idle. No drop, and no having to 'catch' it. Once the computer saw what it was doing at start up, it learned, and made adjustments.

JT's suggesting you disconnect the battery overnight to clear the keep alive memory out of the computer so it doesn't remember all the funky stuff it was trying to do when it was running crappy. If the parts are working correctly, it may 'learn' more quickly without the old memory.