• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Water Getting Inside Door Pillar

  • Thread starter Thread starter Nightstang00
  • Start date Start date May 13, 2017

Nightstang00

Active Member
Mar 20, 2017
133
12
28
May 13, 2017
#1
  • May 13, 2017
  • #1
I have been trying to figure out how water is getting on this weather stripping, I took the panel of the door and took out the speaker, used a hose to find the leak. I replaced the door belt weather stripping inside and out, the door weather stripping, adjusted the door to close properly( adjusted the striker). I checked inside the door and both drains are not clogged. Any ideas? I've attached a picture of today after it rained all day.
 

Attachments

  • IMG_3907.webp
    318 KB · Views: 175

Nightstang00

Active Member
Mar 20, 2017
133
12
28
May 13, 2017
#2
  • May 13, 2017
  • #2
The door pillar where the carpet sits is painted with por 15 , it looks wet but it isn't. Mainly, the water is sitting on the weather stripping and some soaked into the carpet. You can see the color difference
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
27,990
10,618
213
polk county florida
May 13, 2017
#3
  • May 13, 2017
  • #3
Is it wet under the door seal where it pinches over the metal?
 

Nightstang00

Active Member
Mar 20, 2017
133
12
28
May 13, 2017
#4
  • May 13, 2017
  • #4
karthief said:
Is it wet under the door seal where it pinches over the metal?
Click to expand...
Not to sure where your referring to.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
27,990
10,618
213
polk county florida
May 13, 2017
#5
  • May 13, 2017
  • #5
If you pull up the rubber door seal is the pinch weld area underneath wet
 

Nightstang00

Active Member
Mar 20, 2017
133
12
28
May 14, 2017
#6
  • May 14, 2017
  • #6
karthief said:
If you pull up the rubber door seal is the pinch weld area underneath wet
Click to expand...
I have not checked that. I just replaced the weather stripping two months ago. I'll double check this. I wonder if the door isn't aligned correctly and it's not sealing correctly near the hinge and pooling in that area
 
You must log in or register to reply here.

Similar threads

Water leak from hatchback door
  • jeremyzcook82
  • Nov 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
215
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 25, 2025
jeremyzcook82
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
200
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
301
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
T
Convertible A-pillar weatherstrip issues
  • thiefofcheese
  • Oct 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
371
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 20, 2025
AeroCoupe
F
Progress Thread My First Mustang - Pace Car Mysteries
  • First Mustang
  • Oct 24, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2024
ustacould
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?