If you have remote keyless entry, it could be the receiver or a stuck/shorted lock switch. Because it stops when you press the unlock switch, my money is on the switch.
The lock actuators keep turning on and off because they have internal thermal circuit breakers that self-reset after they cool down.
To remove power to the actuators, you have to remove the lock system circuit breaker in the fuse box. The fuse is only for the wireless remote receiver.
The lock actuators keep turning on and off because they have internal thermal circuit breakers that self-reset after they cool down.
To remove power to the actuators, you have to remove the lock system circuit breaker in the fuse box. The fuse is only for the wireless remote receiver.
According to my Haynes manual, the control module is located somewhere in the trunk area, and has 31 different wires connected to it. There should be an identical circuit breaker for the power windows. You can tell if you removed the correct one if you replace the regular fuse and the trunk release still does not operate. The power lock circuit breaker also protects the trunk lock solenoid.
You are right . . . the anti-theft control module also is wired to the lock actuators.
You are right . . . the anti-theft control module also is wired to the lock actuators.