What size DynoMax Bullet Muffler to get?

FiveOhhStang · Jan 30, 2004

What size DynoMax Race Bullet muffler Do i need? I am running Stock Headers, & Stock H-pipe with factory Mufflers, so I just want to swap the mufflers for bullets... Could someone maybe go on Summit and give me a part# or link as an example? Gonna order them tommarow, NEED HELP!
-Nick

mustangdaren · Jan 30, 2004

here you go, Part# WLK-24215, these are the 2.5 inch dynomax bullets that are 16.5 inches long. They make a 2.25 which is the size of your factory exhaust but you would be better to get the 2.5 that way if you upgrade the rest of your exhaust later you will not have to buy them again. A muffler shop can flare out your factory pipes to fit the 2.5 inch mufflers.

Here is a link to the page http://store.summitracing.com/defau...earchtype=both&part=dynomax+bullets&x=16&y=15

T_5.0_N'works · Jan 30, 2004

mustangdaren said:
here you go, Part# WLK-24215, these are the 2.5 inch dynomax bullets that are 16.5 inches long. They make a 2.25 which is the size of your factory exhaust but you would be better to get the 2.5 that way if you upgrade the rest of your exhaust later you will not have to buy them again. A muffler shop can flare out your factory pipes to fit the 2.5 inch mufflers.

Here is a link to the page http://store.summitracing.com/defau...earchtype=both&part=dynomax+bullets&x=16&y=15

What he said.

I just got mine in yesterday and they are 2.5''. I also have stock headers and H pipe so 3'' wouldn't have been a good idea. I hope they have the sound I want though...

Black331Stang · Jan 30, 2004

fiveohh....did u find a good sound clip to persudae u to get them yet???

and are u guys going with tailpipes??

T_5.0_N'works · Jan 30, 2004

Black331Stang said:
fiveohh....did u find a good sound clip to persudae u to get them yet???

and are u guys going with tailpipes??

No haven't heard any sound clips but every one raves about them. I currently have some mufflers, I dunno sounds like 3 chamber flows, really quiet, hate them. The bullets are really cheap so I thought why not give them a try, cause I like my v8's really loud. I will have tailpipes on it, it is a coupe, gotta have the chrome tail pipe look.

*EDIT* Whoops, thought you were talkign to me, my forum name is 5.0hh on a different forum though, got mixed up. Ignore my post.

Kikwear · Feb 17, 2004

My Bronco 5.8 with single 3", cat and 3" Dynomax Race Bullet.

http://www.angelfire.com/ne2/ray21_f150/351wDynomaxBullet.mp3

Black331Stang · Feb 17, 2004

nick - ever get the off raod pipe with them? i liked your clip but they sounded muffled, i think off road ppipe would mkae them sound awesome

PURESTREET5006 · Feb 17, 2004

I run the Dynomax"bullets" on my car with 1 3/4 BBK LT headers and DR-GAS X-pipe these are also 2 1/2 inch....There quiter than 2 chamber flowmasters at idle but when you jump on it!!! Hold on to your hats!!!!!

AxeGrinder30thZ · Feb 19, 2004

I have them on my car. Dual 3". I only did 3" cause I have headers. If I left stock manifolds on, I probably would have gone with 2.5". But I hope you like them...I know Stangs and LT1's have completely different sounds, but I'm happy with them. They sound nasty!

ECU5.0 · Feb 19, 2004

ive got them...love em...im gonna try to get a sound clip of my car this weekend after i put my intake and rockers on. ill post it up if i get one.

AxeGrinder30thZ · Feb 19, 2004

I don't think I've ever heard a Mustang w/ Bullets. I'd love to hear what it sounds like! I imagine it would sound better on a 5.0 than the 4.6's.

mustangdaren · Feb 19, 2004

Here is 3 inch dynomax bullets on my car with turn downs. The idle is a little high (around 900-1000 rpm) It has more lope and sounds better when the idle is 750-800.

http://mustangdaren.web.aplus.net/sitebuildercontent/sitebuilderfiles/mov00039.mpg

mustangdaren · Feb 19, 2004

Here is 3.5 inch bullets with turn downs on my friend Matt's car.

http://mustangdaren.web.aplus.net/sitebuildercontent/sitebuilderfiles/eggleton1.mpg

wrathchild · Feb 19, 2004

Anyone have a picture of these on the car? They are a straight tube right? The flowmasters i have on are offset in/out. Just curious to see how they were welded up?

mustangdaren · Feb 19, 2004

wrathchild said:
Anyone have a picture of these on the car? They are a straight tube right? The flowmasters i have on are offset in/out. Just curious to see how they were welded up?

wrathchild · Feb 19, 2004

Nice but i was hoping to see them with tailpipes. Cant pass inspection in pa with turn downs.

mustangdaren · Feb 19, 2004

I don't have any with tails but all it would take is cutting the dumps off mine and adding a piece of pipe with a very slight bend to connect to the tails. My dumps are located just about exactly where the dumps were with my flowmasters.

AxeGrinder30thZ · Feb 19, 2004

You can see pics of mine in my sig. I have turndowns as well. It's really hard to do true duals on F-Bods w/ tailpipes.

What size DynoMax Bullet Muffler to get?

FiveOhhStang

New Member

mustangdaren

T_5.0_N'works

New Member

Black331Stang

Active Member

T_5.0_N'works

New Member

Kikwear

Black331Stang

Active Member

PURESTREET5006

New Member

AxeGrinder30thZ

New Member

ECU5.0

Banned

AxeGrinder30thZ

New Member

mustangdaren

mustangdaren

wrathchild

mustangdaren

wrathchild

mustangdaren

AxeGrinder30thZ

New Member

Similar threads

What size DynoMax Bullet Muffler to get?

New Member

New Member

Active Member

New Member

Active Member

New Member

New Member

Banned

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency