• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

What to do what to do...

  • Thread starter Thread starter Stang2003GT
  • Start date Start date Jul 6, 2006
  • 1
  • 2
Next
1 of 2 Next Last
S

Stang2003GT

Member
Jul 7, 2003
254
0
16
Jul 6, 2006
#1
  • Jul 6, 2006
  • #1
Ive finally saved up 2000 dollars!!!!!

What can I do to make my car Fast because right now its realy realy slow. My ford gets ZERO respects.

Heres what I cant do:
NO GEARS-> I like to do 60 mph in Second
NO NOS-> I want constant power
NO Slicks-> No streetablity
NO 93 Octain unless needed to prevent detonation (NO Lameass timing mods)

Imagin that this is never going to touch a dragstrip so there has to be street ability.

Ive been seriously losing sleep over this and after 3 years of owership I realy wish I would of got the SRT-4, I could of added 40 hp for a grand easy as pie and would of ran mid to lower 13s.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jul 6, 2006
#2
  • Jul 6, 2006
  • #2
Why does your future mods say 4.10s and also a SCT tuner (a lame timing mod)? LOL
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jul 6, 2006
#3
  • Jul 6, 2006
  • #3
I say keep saving another 1700 and buy the mongoose kit . Or a few hundred more and get the novi 2000 mongoose kit
 
S

Stang2003GT

Member
Jul 7, 2003
254
0
16
Jul 6, 2006
#4
  • Jul 6, 2006
  • #4
Not happenin after this month I go back to school so maybe Ill get about $2500 all together.
 
S

Stang2003GT

Member
Jul 7, 2003
254
0
16
Jul 6, 2006
#5
  • Jul 6, 2006
  • #5
hotmustang331 said:
Why does your future mods say 4.10s and also a SCT tuner (a lame timing mod)? LOL
Click to expand...

They said that at one time, I was actualy changing my Sig when you were posting.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jul 6, 2006
#6
  • Jul 6, 2006
  • #6
Ok then, $1200 patriot heads and $600 VT stg 2 cams. Do the work youself and get a $140 plenum to boot.
Get your SCT tuner too and your all set. 290+RWHP I would say....without LTs.
 
S

Stang2003GT

Member
Jul 7, 2003
254
0
16
Jul 6, 2006
#7
  • Jul 6, 2006
  • #7
hotmustang331 said:
Ok then, $1200 patriot heads and $600 VT stg 2 cams. Do the work youself and get a $140 plenum to boot.
Get your SCT tuner too and your all set. 290+RWHP I would say....without LTs.
Click to expand...

Totally agree but I dont have the tools at all, and im kinda alone on the install.

If only I had help.
 
S

Stang2003GT

Member
Jul 7, 2003
254
0
16
Jul 6, 2006
#8
  • Jul 6, 2006
  • #8
How much would ur avg shop charge for a head swap? If I could dress the heads first then all they would need to do is swap heads and time the cams up. My guess would be $1000 dollars!!!!!
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jul 6, 2006
#9
  • Jul 6, 2006
  • #9
I think MPH charges $1500 for installing cams that require a spring change....but if you have heads with the springs already installed (like the patriots), then it may be less.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Jul 6, 2006
#10
  • Jul 6, 2006
  • #10
Stang2003GT said:
Ive finally saved up 2000 dollars!!!!!

What can I do to make my car Fast because right now its realy realy slow. My ford gets ZERO respects.

Heres what I cant do:
NO GEARS-> I like to do 60 mph in Second
NO NOS-> I want constant power
NO Slicks-> No streetablity
NO 93 Octain unless needed to prevent detonation (NO Lameass timing mods)

Imagin that this is never going to touch a dragstrip so there has to be street ability.

Ive been seriously losing sleep over this and after 3 years of owership I realy wish I would of got the SRT-4, I could of added 40 hp for a grand easy as pie and would of ran mid to lower 13s.
Click to expand...
youve got 2k saved up for performance mods to the stang and youre asking for suggestions, but dont want gears, nitrous, a blower or a tune (since you dont want 93 octane). sounds to me like you have one choice to make, build the engine N/A or stay slow-since you dont like any other mods. dont waste your money on 2k worth of bolt-ons. they wouldnt even equal the gain of cams.
 

RedDaemon

10 Year Member
Mar 31, 2005
3,470
9
108
Atlanta, GA
Jul 6, 2006
#11
  • Jul 6, 2006
  • #11
only other option is appearance mods

u have to make a compromise if u want to go fast. a blower will make u run 93 octane, unless u under tune it and then ur pissing money away when u claim parts are already over priced

suck it up. get gears, headers and/or heads and cams and go have some fun.
 

DTNODYA

Member
Dec 15, 2005
831
1
16
Jul 6, 2006
#12
  • Jul 6, 2006
  • #12
Instead of paying that much for install, buy some tools.
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Jul 6, 2006
#13
  • Jul 6, 2006
  • #13
I'm not too positive on where 3.73's will put you, but I can do 70 in 2nd, so 3.73's just might meet you still being able to do 60 in 2nd if your that set on still being able to do that.

Truth be told like others have said, you pretty much knocked off some of the best bang for the buck mods for our cars...period. The nitrous can easily add 50 or so hp and you should be way under your $2000 budget. Gears give a nice SOTP feel, and the tuner is a great mod for what it can do, but the power there does infact come from advancing the timing.

If you rule out those, all you have left is the usual bolt ons like underdrive pullies, exhaust (headers, midpipe, catback), TB/Plenum, CAI/drop in filter, heads and cams, all of which easily eat up money fast. Just doing full exhaust and paying for the install is pretty much going to waste your budget with ease.

If I was looking to really add a nice kick in the pants with 2,000 with regard to driveability, I would rethink what you are set against, and go with a dry/wet nitrous set up (wet is more expensive, but you can get a good 50+ out of a dry kit), and get a good midpipe with some weld in mufflers.
 
S

stanggt00

New Member
Jul 16, 2003
371
0
0
baltimore md
Jul 6, 2006
#14
  • Jul 6, 2006
  • #14
dude trust me save up alittle more for a mongoose kit
TRUST ME !!!

if i could do it over i would go mongoose kit then forged motor end of story
once you get blown any other mod you get like tb,plenum,headers will give you almost 2x as much power on a blown car

check it out

plenum+tb ----->450.00
full exuast (lt headers,x-pipe,cat-back)----->1100.00
camms-------->550.00
cai-----------> 200.00
gears-------->150.00
tuner--------->400.00
heads------->1400.00


total ------>4200.00 bucks and thats in parts not installed

avg blower 3700.00 and can be installed with basic tools will give you more hp then most or all these mods combined
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jul 6, 2006
#15
  • Jul 6, 2006
  • #15
sell the mustang and buy a bike... seriously if ya wanna go fast with those limitations your not gonna have much luck
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Jul 6, 2006
#16
  • Jul 6, 2006
  • #16
Just did some research for the route *I* would go, assuming I wanted good power on a $2,000 budget.

NX wet nitrous kit - Ebay, $505.
NX bottle heater - Ebay, $95
NX TPS switch - Ebay, $20
Any midpipe - $150 approx O/R, $400 catted
Mufflers - $90 approx for pair

For parts with a catted midpipe, you're looking at around $1100. Thats only half your budget with a potential 100 - 150hp. The remaining $900 should easily cover install of the parts and a good tune. You cannot say this would not be a good route to go.
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Jul 6, 2006
#17
  • Jul 6, 2006
  • #17
Suspension Mods
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jul 6, 2006
#18
  • Jul 6, 2006
  • #18
:worthlesa
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
Jul 6, 2006
#19
  • Jul 6, 2006
  • #19
jasonh_86 said:
:worthlesa
Click to expand...

+1 I'd say save more and get blower
 
S

Stang2003GT

Member
Jul 7, 2003
254
0
16
Jul 7, 2006
#20
  • Jul 7, 2006
  • #20
I wish I could save up, but I wont get a chance to work agian for another year due to college. I also dont think the money will remain un touched during college.

I would be realy happy with just a set of VT Stage 1 cams but I cant find anywere to get them install for a reasonalbe price.

Looks like 2 grand is chump change in the mustang world.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

L
96 Mustang GT vert. Had some mods when I bought it. What do I do now?
  • Lindenmooch
  • Oct 7, 2020
  • The Welcome Wagon
Replies
4
Views
2K
The Welcome Wagon Oct 10, 2020
leibldg
W
Hopefully, I'm doing this right.
  • Wireflight
  • Apr 10, 2021
  • The Welcome Wagon
Replies
11
Views
1K
The Welcome Wagon Aug 4, 2021
nickyb
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
What To Do,.....what To Do.
  • CarMichael Angelo
  • Aug 18, 2012
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 19, 2012
CarMichael Angelo
Jer, Bear, And A Couple Of Longhairs.
  • CarMichael Angelo
  • May 20, 2012
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 25, 2012
No.11
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?