• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

What to do with air bags?

  • Thread starter Thread starter BKilla_13
  • Start date Start date Jan 28, 2010

BKilla_13

New Member
Jan 25, 2010
47
0
0
Jan 28, 2010
#1
  • Jan 28, 2010
  • #1
My airbags went off when I hit a guard rail head on a few years ago. I am just now getting it up and running. I replaced the body parts and now I am on to the interior. I cut the airbag out of the steering wheel and just tucked the pass side back in. My question is what does it take to replace them? I was just going to leave them as is but the look of the steering wheel is going to bug me so should I just replace the steering wheel or both the air bags? I don't plan on wrecking it again, haha, but I would like to have it back to stock, or to look stock at the very least. I did a search but didn't find anything that pertained to my situation. I just want to know what is involved as far as work and money. Thanks.
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Jan 28, 2010
#2
  • Jan 28, 2010
  • #2
I had to replace my airbags due to a dumb@$$ cutting across traffic and hitting me in front of the driver's wheel. Little damage, but it set off the airbags. The airbags are replaceable, but you'll spend about $400 or more to get them used.

Normally, one should disconnect the battery and wait 15-20 minutes before removing the airbags. Unplugging them while there's power in the airbag system CAN blow the airbags. It's just not worth the risk. In your case, the airbags are blown so it's irrelevant. Be sure to disconnect the battery before replacing the airbags, however.

The driver's airbag is attached by two bolts and an electrical connector. On the side of the wheel, you'll see a round plug with what kinda looks like a slot. Pop off the covers with a small screwdriver and you'll reveal a bolt head on each side. Remove the bolts and the airbag will be free. Pull it out slowly, then disconnect the one electrical connector. Reverse the instructions to install the new bag.

The passenger airbag is a little trickier. The two bolts and connector are hidden in the dash, so you must remove the glove box to get at them. The bolts are recessed in a metal support bar, so they're hard to see anyway. Also, there are usually two bits of velcro-like stuff holding the two side corners of the airbag cover down. Pull up on the corners to free the velcro. Once the two bolts are out and the plug next to them is undone, you can give the airbag a push from the back to get it moving. Then slide it up a bit then out.

You'll also need to replace the airbag computer, they're normally a one-use item. X 2 It's a blue box mounted on the transmission tunnel behind the stereo amp. You can get to it by looking in the driver's footwell and peeling back the carpet. There are two connectors leading to it; one black and one gray, if I remember right. Remove the bolts on both sides of the bracket, and you can get the box out without removing the dash.

Airbags can be bought of off eBay, the Corral or check your local Craigslist.
Hope that helps.
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Jan 28, 2010
#3
  • Jan 28, 2010
  • #3
go to the "how to" thread at the top of the 94-95 tech section,click on the "how to paint dashboard" link.
a pictoral guide on how to remove and replace the air bags,but not the control module.
 

4Jenna

Founding Member
Sep 12, 2001
4,326
6
69
AZ
Jan 28, 2010
#4
  • Jan 28, 2010
  • #4
I have a set forsale, pm me if interested.
Wheel, and dash

Cheap to

-Chris
 
You must log in or register to reply here.

Similar threads

9
New from northern MN
  • 91firecracker
  • Apr 19, 2026
  • The Welcome Wagon
Replies
5
Views
135
The Welcome Wagon Apr 19, 2026
Noobz347
Hit something exiting
  • Creomod
  • Mar 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
527
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
General karthief
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
162
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
L
Exhaust 95 gt pypes catted x pipe
  • Lx5.0fiend
  • Aug 22, 2025
  • 1994 - 1995 Specific Tech
Replies
5
Views
350
1994 - 1995 Specific Tech Sep 18, 2025
revhead347
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
393
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?