• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

whats a stock block worth?

  • Thread starter Thread starter urban96
  • Start date Start date Aug 29, 2006

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Aug 29, 2006
#1
  • Aug 29, 2006
  • #1
just curious what i should offer for one. just the block

maybe a stock gt crank also
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
Aug 29, 2006
#2
  • Aug 29, 2006
  • #2
$400 sounds about right.
 

stangGT97

New Member
Dec 22, 2004
1,299
1
0
Boston area, MA
Aug 29, 2006
#3
  • Aug 29, 2006
  • #3
Retail on a bare Romeo block is ~$325, but can be had for $250ish plus shipping (look it up at oemfordparts.com, part #M-6010-W46).

If the block is used, I wouldn't offer more than $200, especially since you may need to do a slight overbore to clean up the cylinder walls.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Aug 29, 2006
#4
  • Aug 29, 2006
  • #4
i wouldn't pay anymore then $200 for the block and crank together. I see them going for $50/75/100 for the iron...my Teksid was under $300.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Aug 29, 2006
#5
  • Aug 29, 2006
  • #5
yeah ive seen teksid's for around 300~ thats why i was asking what an iron was worth, figured it would be less.. thanks guys
 

jivepepper

Founding Member
Jun 19, 2002
776
5
18
Under a Sombrero. in WV.
Aug 29, 2006
#6
  • Aug 29, 2006
  • #6
I have a stock shortblock with 20 k on it with the oil pump for 400 before shipping. I also have a stock used bare block for 75.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Aug 29, 2006
#7
  • Aug 29, 2006
  • #7
if this one dosent work out i may take u up on that bare block. im just looking to build a forged short block for ~500-600hp over the winter since im pretty sure mines on borrowed time
 
You must log in or register to reply here.

Similar threads

D
4.6L 4 valve Sleeve
  • DangStitches
  • Oct 10, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
147
SN95 4.6L Mustang Tech Oct 20, 2026
DangStitches
D
C
Progress Thread Whats needed on a 3.8 for a super charger to work reliably?
  • Cryfire
  • Nov 4, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
71
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
gkomo
Fox Block Decode
  • PonyGTrider
  • Jun 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
173
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
PonyGTrider
M
Idle control valve
  • miser143
  • Oct 31, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
151
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 1, 2026
General karthief
speedmaster new 302 block?
  • rednotch
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
29
Views
885
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2026
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?