• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What's causing jerky acceleration?

  • Thread starter Thread starter InstantAddict
  • Start date Start date Jun 1, 2007

InstantAddict

New Member
Nov 26, 2002
25
0
0
NJ
Jun 1, 2007
#1
  • Jun 1, 2007
  • #1
My '86 5.0 hasn't been running right lately. During acceleration, it kind of jerks and sometimes when I am going at a constant speed I will get similar shakes like as if I was tapping on the gas real quick. Also, it hasn't been idling too consistently. The idling isn't that bad but it would jump between 500 and 750 rpms. Any ideas what could be causing this? Thanks.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 1, 2007
#2
  • Jun 1, 2007
  • #2
My first question would be was the last time you did a tune up? spark plugs, wires, rotor, and cap. Next for the surge I would look at cleaning the TB and the IAC.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jun 1, 2007
#3
  • Jun 1, 2007
  • #3
is there a drivetrain clunk at all? Might be the U joints in the driveshaft. Thats why my car was stumbling
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 1, 2007
#4
  • Jun 1, 2007
  • #4
Dump the codes and see what the computer says is wrong…Codes may be present in the computer even if the Check Engine light isn’t on.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/







IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Wal-Mart.

Or for a nicer scanner see http://www.midwayautosupply.com/pc-7208-90-equus-digital-ford-code-reader-3145.aspx – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
625
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
H
Hanging idle issues
  • HydraX
  • Mar 22, 2025
  • SVT Tech Forum
Replies
5
Views
739
SVT Tech Forum Aug 4, 2025
squeak93
F
Trouble Shooting Sudden Shift of AFR at low RPM
  • Farva_84
  • Jun 6, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
641
SN95 4.6L Mustang Tech Jun 8, 2025
Farva_84
F
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?