• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Where is my starter located in my 92 fox

  • Thread starter Thread starter BLADDER92FOX
  • Start date Start date Feb 14, 2006

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
Feb 14, 2006
#1
  • Feb 14, 2006
  • #1
My starter died yesterday,when i turn the key it just makes that clicking sound. I wanted to see where it is located so i can hit it and see if it would start so i can drop it off at my mechanics house. From facing the car what side is ot on and under.My car is a 92 coupe 5.0 btw.
 

Blakthorn

Member
Jul 24, 2004
299
1
16
US
Feb 14, 2006
#2
  • Feb 14, 2006
  • #2
when facing the car its on the left side, its easy to get to it from under the car


lets say if you were to put your body under your car on your back, it would be on the right side looking up, its more toward the front of the car, its big cylinderish and black and metal (usually)

it may also be your starter solenoid that went or is bad.

if you are to open your hood and look at your engine from the front, its located on the right side by the ignition wires, says diode something on it
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Feb 14, 2006
#3
  • Feb 14, 2006
  • #3
It is on the passenger side of the bellhousing.

Also, the clicking sound could be a low battery.
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Feb 14, 2006
#4
  • Feb 14, 2006
  • #4
Some references:

View attachment 487316

View attachment 487318
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Feb 14, 2006
#5
  • Feb 14, 2006
  • #5
Like said above, i would also consider the battery as the problem. Try jumpstarting the car before you deal with climbing underneath and messing with the starter.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 14, 2006
#6
  • Feb 14, 2006
  • #6
Another vote to check the electrical system out first.

Good luck.
 

cjman15

Banned
Apr 15, 2004
1,009
0
0
Fairfield, PA
Feb 14, 2006
#7
  • Feb 14, 2006
  • #7
I still can't see the starter in that pic?
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Feb 14, 2006
#8
  • Feb 14, 2006
  • #8
cjman15 said:
I still can't see the starter in that pic?
Click to expand...

That's because it's not there. It was removed for the clutch kit replacement. I usually rest them somewhere on the frame when they need to be removed when I am removing the bellhousing. Usually it's put on the k-member, but I have no idea where it was in that picture. I was trying to give the original poster a general idea.
 

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
Feb 14, 2006
#9
  • Feb 14, 2006
  • #9
I already talked to my mechanic later today and he said he'd come here first thing tomorrow morning. I appreciate all the pics and help guys. I tested everything myself and i know its the starter. How much does a reman starter go for ?60?
 

Euphoric306

New Member
Apr 5, 2004
905
0
0
Feb 14, 2006
#10
  • Feb 14, 2006
  • #10
didnt read posts but it's 99% most likely your battery dead. even if you tried jumping it it wouldn't start, theres not enough juice in the battery to power the starter, so the relay just clicks n clicks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 14, 2006
#11
  • Feb 14, 2006
  • #11
The only way to know it's the starter is to bench test it, which means removing it.

Good luck.
 

9350coupe

New Member
May 11, 2005
109
0
0
chicago
Feb 14, 2006
#12
  • Feb 14, 2006
  • #12
hopefully not the starter...It can be pain to remove
 

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
Feb 15, 2006
#13
  • Feb 15, 2006
  • #13
It was the starter,i knew it couldn't be anything else cause my battery is new and my alternator was bought new 2 years ago when i bought the car. I just got a reman one.I could see it now from my engine bay cause its silver,and i can see it under the car perfect.The old one was soo dirty and black there was no way for me to see it. I got it fixed with labor for $100 bucks,dam that was going towards my c\c plates too. Now i have to wait one extra check to get them along with my lowering springs.
 
1

1SLO306

My 97 GTP owns you ALL!
Mar 31, 2005
904
1
17
Muhlenberg, ky
Feb 15, 2006
#14
  • Feb 15, 2006
  • #14
Strater is a real pain to get off if u have long tubes. I know mine was a PITA. i had to jack up the pass side of ebgine to get it out. Good luck man!
 
You must log in or register to reply here.

Similar threads

C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
122
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
146
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
M
2004 v8 convertible
  • Mikeycrownvicluver
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
371
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
Mikeycrownvicluver
M
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
309
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
259
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?