Which injectors?

MrClean302

Founding Member

Mar 4, 2002

226

0

17

Ontario, Canada

Sep 22, 2006

#1

• Sep 22, 2006

• #1

I'm in the process of putting my engine back together and noticed one of my injectors cracked on the end where it plugs into the lower intake.

I found a good deal on 30# but wonder if they are too big for my application.

Going to be running a Cobra intake, GT40P heads and stock cam.

I was going to run the stock injectors but found the crack so I might as well replace them. Any ideas?

 

ponyboy19

Founding Member

May 24, 2000

1,640

0

36

Sep 22, 2006

#2

• Sep 22, 2006

• #2

If you want to spend some cash, buy a set of 24's and matching MAF. If you want to be cheap, pick up a used set of stockers off ebay and run the 19's for 30-40 bucks.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Sep 22, 2006

#3

• Sep 22, 2006

• #3

For what you are gonna do, you don't need those 30's.

You could use them but you would need a tune to make them work like they should under all driving conditions.

Grady

 

mootang

New Member

Dec 5, 2004

907

0

0

texas

Sep 23, 2006

#4

• Sep 23, 2006

• #4

if you broke the plastic nipple on the end you can buy new ones from most auto parts stores. they are like $3 per kit and it comes with the two plastic peices and the o' ring for one injector.

 

Methodical

15 Year Member

Dec 1, 2003

1,192

11

59

Clinton, MD

Sep 23, 2006

#5

• Sep 23, 2006

• #5

mootang said:

if you broke the plastic nipple on the end you can buy new ones from most auto parts stores. they are like $3 per kit and it comes with the two plastic peices and the o' ring for one injector.

Click to expand...

There it is. Plus if you change injectors you will need matching MAF sensor. $3 kit sounding better.

 

AznStanger3v

Active Member

Aug 11, 2003

2,026

0

47

Northern VA

Sep 23, 2006

#6

• Sep 23, 2006

• #6

yeah dude, that combo wont even need anything higher than 19s.

 

MrClean302

Founding Member

Mar 4, 2002

226

0

17

Ontario, Canada

Sep 26, 2006

#7

• Sep 26, 2006

• #7

mootang said:

if you broke the plastic nipple on the end you can buy new ones from most auto parts stores. they are like $3 per kit and it comes with the two plastic peices and the o' ring for one injector.

Click to expand...

I really didn't want to change my injectors/MAF at this point and this is good news. Thanks for the tip.