I had a link I saved that explained what I needed to rebuild my 99+ PBR brakes but now the link is dead. Anyone know where I can get the rebuild kit or a link on how to install the calipers?
Who sells brake rebuild kits? Anyone have the PBR swap info?
- Thread starter BlueOvalStangGT
- Start date
-
Sponsors (?)
juiced_94gt
Active Member
all you need to install the calipers are the calipers themselves and the brackets that bolt to the spindle...easy swap just get 99gt pads.
SSBC has rebuild kits but unsure if they have any for the 99+ PBR.
I bought the kits to rebuild my Cobra Calipers for $22 each. Came with all the seals and gaskets and two new pistons each. The speed bleeders were a separate purchase.
It was very easy to rebuild the calipers. The reason i rebuilt was torn boots on both. I didn't want dirt getting in and messing up the piston so i just got the kits.
View attachment 515242
Write-up on how to rebuild. Should be about the same procedure.
http://neptune.spacebears.com/cars/stories/calipers.html
I bought the kits to rebuild my Cobra Calipers for $22 each. Came with all the seals and gaskets and two new pistons each. The speed bleeders were a separate purchase.
It was very easy to rebuild the calipers. The reason i rebuilt was torn boots on both. I didn't want dirt getting in and messing up the piston so i just got the kits.
View attachment 515242
Write-up on how to rebuild. Should be about the same procedure.
http://neptune.spacebears.com/cars/stories/calipers.html
http://www.stainlesssteelbrakes.com/
But i couldn't find the rebuild kit on their website. You might have to email them.
I found my kit from
http://www.martelbrothers.com/catal...Bleeder_Kits_Caliper_Rebuild_Kits_page_1.html
But i couldn't find the rebuild kit on their website. You might have to email them.
I found my kit from
http://www.martelbrothers.com/catal...Bleeder_Kits_Caliper_Rebuild_Kits_page_1.html
Similar threads
