I searched this thread and did not see where you mention that there are two different thread pitch banjo bolts on the Cobra and Mach 1 front calipers. If I remember correctly the thread pitches are M10 x 1.00 and M10 x 1.50. I also want to say that 94-2002 are fine thread and somewhere in the 2003 production year they switched to the coarse thread on the Cobras but all the Mach 1's were coarse thread.
Only mention this as it seems to come up in a lot of threads dealing with the swap. This site has a bunch of parts for this swap and the bolting is at the bottom of the page:
Only mention this as it seems to come up in a lot of threads dealing with the swap. This site has a bunch of parts for this swap and the bolting is at the bottom of the page:
disc brake rotors,brake rotors,hawk performance brake pads,brake caliper sets brake drums and brake shoes tools!
We have Hawk brake pads,brake rotors for all makes of cars or trucks. We have supplied the automotive industry with disc brake rotors, hawk performance brake pads,brake caliper sets, brake drums, drilled and slotted rotors and brake shoes for over 30 years.
www.discbrakesrus.com