ok I will get a camera next week and take the pics I got a famaly thing this week.
VIN 1fabp28w5ef131542
I took teh rear interior pices out so I could replace the 1/4 windows and kinda clean the floor up.
motor has 15K on a rebuild and as I said its a strong running motor, dident stutter or stall or nothing when I drove the truck.
Interior needs the pannals and rear seets put back in, dashpad(i have the old one but its falling apart as these dash pads suck).
Needs new seat bolts a couple broke and I cant get them out with the tools I have.
theres a small crack in the passanger taillight lens the rear bumper cover needs replaced its splitting.
theres a small dent in the fender where an old guy hit me the doors needs some body work, theres rust on the driverside rear quarter pannals near the bumpercover.
impact absorbers are good, I have the hood but the scoop is missing, gonna need to bring a set of rims to roll it around on as I need the rims for my other mustang(polycasts suck), I might have a driveshaft.
front swaybar mount needs to be fixed, eletric locks and windows work(well), center collom armrest pad neds to be replaced, no headliner(wasent there when i got it), door seals are good but wouldent help needing replaced, sunroof seal needs replaced, hatch seal looks good, I was told its an 8in rearend(no tag that I can find to prove), everything works, the gas guage is backwards cause of the ****tart who worked on it put the wires backwards.
the previous owner removed the sterio wires and ran there own so they hardwired it to the fusebox radio fuse..
theres a dent in the wheel well lip on the passanger side I beleave.SFC are still good for being factory.
Motor needs a good powerwash has a 2 barrol carb/intake I think its an early 80s model, needs a tuneup(belts plugs wires cap rotor oil change thermostat).
only acc the motor has is a removed A/C unit(dont knwo if it works never tested it forgot to) alt no PS pump(think one off a 2.3 would work if you modifyied it a bit?).
Its got a fuel pump/tank from a 93 GThatch.
brakes work well could use new pads.
Lights work well, previous owner removed the main latch and put hood pins in never had a problem with the hood(safty latch is still there dont worry).
thats about all I can do in words I will try to get picks next week wont be abel to do anythig about the car till then.
Oh i also have factory hpipe a friend gave me if ya want that you can, but the motor the manual flywheel and bellhousing(not sure what the bell housing is for was told it will bolt up to a t5) will go with it.
well all thats left is to wait for the detailed pics I guess....