It's 402hp & 377ft. lb. torque with 87 octane.
2011 Ford Mustang GT 5.0 Coyote Engine
5.0 Tech Specs
5.0 4V TiVCT V-8
First Model Year 2011
Engine Family Modular
Code Name Coyote
Displacement 4957cc (302 ci)
Bore x Stroke 92.2 x 92.8mm (3.263 x 3.647 inch)
Horsepower
•412 hp @ 6,500 rpm, 91 octane
•402 hp @ 6,500 rpm, 87 octane
Torque
•390 lb-ft @ 4,250 rpm, 91 octane
•377 lb-ft @ 4,250 rpm, 87 octane
Shipping Weight 430 pounds, includes water pump
Block Low-pressure cast 319 aluminum, pressed-in thin-wall iron liners
Bore Spacing 100mm (3.937-inch)
Deck Height 227mm (8.937-inch)
Deck Thickness 13mm (0.510-inch)
Cylinder Head Retention 12mm bolts, 4 per cylinder, 10 bolts total per bank
Oil 5W/20 weight, mineral
Oil Pan Stamped steel, 8 quarts
Windage Tray Integral w/oil pan gasket
Oil Pump Gerotor
Pistons Hypereutectic, short-skirt, flat-top w/four equal valve reliefs; moly friction-reducing coating; oil-jet cooled
Piston weight 500 grams
Piston Pin Full-floating, 22mm diameter
Piston Pin Retention Wire lock
Piston Rings 1.2 x 1.2 x 2.5 mm, moly top ring
Connecting Rod Powered metal forging, I-beam, no balance pad
Connecting Rod Length 150.7mm (5.933-inch)
Rod/Stroke Ratio 1.62
Crankshaft Forged steel, fully counterweighted, induction hardened
Main Journal 67.5mm (2.652-inch) diameter
Rod Journal 53.0mm (2.082-inch) diameter
Flywheel Retention Eight-bolt
Cylinder Heads Aluminum, four-valve per cylinder
Head Bolts 12mm, four per cylinder
Valve Covers Composite
Compression ratio 11.0:1
Valves 37 x 31mm (1.454 x 1.218-inch), four per cylinder
Camshafts DOHC, four camshafts, independently adjustable timing
Camshaft Timing Twin independent variable
Duration 260 degrees intake, 263 degrees exhaust
Lift 12mm (0.472-inch) intake, 11mm (0.432-inch) exhaust
Lift Limit 13mm (0.510-inch) physical limit in head
Valve Followers Roller-finger follower
Lash Adjusters Hydraulic
Coolant Organic (red)
Exhaust Manifold Short-tube, S44100 stainless-steel Tri-Y tubular headers; 10mm mounting studs w/prevailing torque nuts
Intake Manifold Constant cross section, long-runner single-plane (single-scroll); molded composite w/upper section colored; front throttle body mount
Throttle Body Single-blade, 80mm, e-throttle
Engine Management Software Copperhead
Mass Air Meter 86mm, digital
Oxygen Sensors Universal Exhaust Gas
Knock Sensors Two, in block valley
Ignition Timing Crank trigger, rear of crankshaft
Ignition Coil-on plug
Spark Plug NGK Iridium
Firing Order 1 5 4 8 6 3 7 2
Cylinder Numbering
•Right bank: 1, 2, 3, 4
•Left bank: 5, 6, 7, 8
Fuel System Port fuel injection, returnless
Fuel Injectors 32.8-lb/hr
Fuel Pressure 55 psi
Fuel Requirement 87 octane minimum, 91 octane best/rated power
Check out this link to the entire in-depth article on the beast we call the coyote:
2011 Ford Mustang GT 5.0 Coyote Engine - 5.0 Mustang & Fast Fords