Big Air 90mm MAF Meter BA-2400

[brent_cosenza]

Will the Big Air 90mm MAF Meter BA-2400 plug right up and work on my 02 GT?

 

[Kilgore Trout]

No you would have to get it re-tuned. Also, odds are the stock MAF is all you need. Do not waste your money.

You need to tell us your mods but the odds are that you do not need a different MAF.

 

[brent_cosenza]

My mass air meter is malfunctioning, and I wanted to upgrade the size anyways. Thats why I was wondering. My mods consist of Steeda CAI, 75mm Plenum and TB w/Spacers, 4.10 gears, FRPP Underdrive pulleys.

 

[Kilgore Trout]

Clean your MAF sensor, reset your PCM, I bet that solves your problems.

 

[brent_cosenza]

i'll give it a shot but the OBDII showed a Air Flow Meter Malfunction...

 

[Kilgore Trout]

http://www.bullittarchive.com/1007.htm

 

[DBMSTNG]

My mass air meter is malfunctioning, and I wanted to upgrade the size anyways. Thats why I was wondering. My mods consist of Steeda CAI, 75mm Plenum and TB w/Spacers, 4.10 gears, FRPP Underdrive pulleys.

if you don't have close to 400rwhp, don't bother with the BA2400. you're resolution will be crappy as hell.

the computer reads 0-5 volts from the maf. normally, you want the voltage to peak in the 4 to 4.5 range. i'm peaking at about 3.75 volts with a little over 400rwhp. you'd see 2.5 volts at best.

 

[brent_cosenza]

Thanks that check engine light was annoying.