Well ive been working on this on and off for the last month or so. I decided i didnt like the look of the ridges that the typhoon has, so i ground them all down smooth. This took a long as time, since the compressor i have is only 26 gallons and cant push the cut off tool and diegrinder hard for a very long period of time.
Its not done yet, what you see here is 220 grit in most spaces, some of it needs to be touched up and i didnt get to a few of the hard to reach areas yet. Im just wondering what you guys think of all the ridges ground down.
And yes im using my front bumper as a work bench
Heres a couple pics of other polished parts that will be going on the new settup.. I didnt polish these..
Its not done yet, what you see here is 220 grit in most spaces, some of it needs to be touched up and i didnt get to a few of the hard to reach areas yet. Im just wondering what you guys think of all the ridges ground down.
And yes im using my front bumper as a work bench
Heres a couple pics of other polished parts that will be going on the new settup.. I didnt polish these..