I took everything apart to paint the engine bay and install some parts (headers, valve covers, fox throttle body swap). I unplugged nearly every plug that was on the fender aprons so i could move them out of the way to paint everything. I finally got everything back together and the engine cranks but will not start.
Maybe there is a plug that is not making a good connection somewhere?
Maybe when I was moving the wires around one of the old brittle wires broke in half?
Maybe I messed something up with the fox throttle body swap?
I pulled the #1 spark plug wire off the cap and there is a visible arc to the intake manifold, so I don't think spark is the issue (not a very scientific test).
I poked the shrader valve on the fuel rail and gas shot out, so I don't think fuel pressure is the issue either (not a very scientific test).
Anyone have an idea? I really need my car back.
Thank you
Maybe there is a plug that is not making a good connection somewhere?
Maybe when I was moving the wires around one of the old brittle wires broke in half?
Maybe I messed something up with the fox throttle body swap?
I pulled the #1 spark plug wire off the cap and there is a visible arc to the intake manifold, so I don't think spark is the issue (not a very scientific test).
I poked the shrader valve on the fuel rail and gas shot out, so I don't think fuel pressure is the issue either (not a very scientific test).
Anyone have an idea? I really need my car back.
Thank you