I thought this was going to be a pain but using a deep well 9/16" socket and a swivel, it wasn't too bad. I guess being 5'10" 155 lbs doesn't hurt either lol.
I thought since my car was a '93 with the different strut towers I could get away with not bashing them in. I was way wrong. Three things that I had to do to get the thing in there.
1. Bash the strut tower, just when you think it's enough, it's not lol.
2. Trim about 1/4" off the mounting studs
3. Clean up the firewall holes. I noticed the holes in the firewall and the holes for the pedal assembly weren't lined up perfectly. So I used a drift punch to tweak it and then used a 3/8" drill bit to clean it up a bit.
I also noticed my brake light was stuck on. Turns out I didn't line the switch up perfectly with the flat spot on the booster push rod.