I was looking at the Mishimoto dual fan from american muscle, but it only stated 1900 cfm combined whereas the Contour's claims 3500 cfm. Could be your issue.
What pulley set up are you running with your set up? I want to run the contour fans but not sure I will have the room. The supercharger belt sits pretty close to the current dual spal fans I'm currentley running.
What pulley set up are you running with your set up? I want to run the contour fans but not sure I will have the room. The supercharger belt sits pretty close to the current dual spal fans I'm currentley running.
Did you have to trim the fan shroud or anything special for clearance?Pioneer balancer with the stock Vortech 8 rib crank pulley
I have the same one and it was ok till you sit in traffic with the ac on. It was rated at like 2000 cfm IIRC and the contour fans are like 3000+.I like the sn95 fans if you don’t mind making one work, or if you have an aluminum radiator you can weld a couple bungs on.
If not, we’ve had good luck with 2 of these and the shroud from lmr. Their house brand fans royally suck, but their shroud works good for these. Just need to drill mounting holes for them, but that only takes a couple mins.
The spal fans of the ones lmr sells?I have the same one and it was ok till you sit in traffic with the ac on. It was rated at like 2000 cfm IIRC and the contour fans are like 3000+.
just my experience.