Increasing steering angle / turn radius

[drift101]

Hey Guys, first off I would like say that I just got a new 2000 GT Pony.

Just finished decreasing the slack on the accelerator with 1-inch spacer.
Now I was wondering what to do to increase the steering angle/turn radius of the car. I have a '90 240sx and I replaced the tie rod with aftermarket ones to get the same effect. do i replace the tie rods for the stang as well to get the same effect?

 

[drift101]

does anyone have a suggestion about this? anything would help....

 

[YardSpecial]

03 Cobra lower control arms, 10 % less turning radius..........

$160 for the pair.......

 

[drift101]

thanks for the reply!

but isnt that just a 10% less turning radius on the models up to 98? so what does that mean for the 99-2004 mustangs? any improvement?

 

[Dailydrifter]

thanks for the reply!

but isnt that just a 10% less turning radius on the models up to 98? so what does that mean for the 99-2004 mustangs? any improvement?

LOL I'm on hear searching the same thing. I have a 89 notch back with the worst turn angle I've ever seen. I don't think a TEIN spacer is gonna help in our case.
I have a 92 S13 and driving the stang feels like I'm turning in a 18 wheeler.
I'm probably gonna have to do the same thing the El Camino guys did and do some custom work. IF there's no swap or bolt on remedy.