Well i just finished installing a Milodan windage tray into a 306 rebuild. I installed it using the ARP stud kit for it. **WARNING** This is not a bolt on and requires, cuttin and banging. For those of you who are installing one or one similar lemme show ya where to cut and bang.
First here's the sum bisch installed
First on the pickup tube side you're gonna have to cut a 1.5" x 2" piece so that you can bolt the pickup tube down using the main bolt. It boggles the mind why this cut is not there. Otherwise you have to shave off the pickup tube bracket and let it dangle
First here's the sum bisch installed
First on the pickup tube side you're gonna have to cut a 1.5" x 2" piece so that you can bolt the pickup tube down using the main bolt. It boggles the mind why this cut is not there. Otherwise you have to shave off the pickup tube bracket and let it dangle