Power Windows

[Shaolin Crane]

Alright turns out my drivers side motor was bad, i was able to get them up by hooking them to my drill battery, but im still having issues with the switches, so my question is, if the driver side switches took a **** would it cause the passenger side to stop working as well? what could be the problem, everything seems to be hooked up properly and ive already replaced the relay next to the solenoid, but as far as that goes im at a loss, ive read that damn wiring diagram till my eyes bled, and dont know what to do

 

[Celeb]

Alright turns out my drivers side motor was bad, i was able to get them up by hooking them to my drill battery, but im still having issues with the switches, so my question is, if the driver side switches took a **** would it cause the passenger side to stop working as well? what could be the problem, everything seems to be hooked up properly and ive already replaced the relay next to the solenoid, but as far as that goes im at a loss, ive read that damn wiring diagram till my eyes bled, and dont know what to do

Did both switches quit working at the same time? If so power to the switch may be the problem. I would highly doubt both switches internally went out simultaneously, but still possible

When the drivers window quit working were you able to use the switches to roll up the passenger side without the drill battery?

check fuse #14 if you havent already

 

[Saleen0679]

if the driver side switches took a **** would it cause the passenger side to stop working as well?

Yes it's possible. The passenger side switch goes throuigh the driver's side switch. If you lost the ground path on the driver's side switch, the passenger side switch would not work.

 

[Shaolin Crane]

Did both switches quit working at the same time? If so power to the switch may be the problem. I would highly doubt both switches internally went out simultaneously, but still possible

When the drivers window quit working were you able to use the switches to roll up the passenger side without the drill battery?

check fuse #14 if you havent already

i checked the fuse already but its different than the others so i have no real way of knowing, hopefully this weekend i can pick up another switch from the yard

 

[Shaolin Crane]

well guys i started pulling out the harness to check wires and turns out i missed a damn plug, windows work great now, thanks for the replies

 

[fivespeedsteed]

i told you it was somewhere in the wiring.