N/A NPI... 12.01@114

[98COBRA281]

thanks, i cant waint for a DA near 0! i would love a 116mph pass!

That's very nice. You are soooo close to 11s that it hurts.

So compared to your 12.2X runs, your only change is the wheel and tire setup? about 2 tenths from that?

Man, I need to get out to the track again. I've been making a few changes on the 2.3 and I think it will be a good bit faster. Especially if I can get some nice fall air.

befor i went 12.38@111. i changed the wheels, went to 4.56's from 4.30's, ditched the rear sway bar, and added the 2" plenuim spacer, and the weather was better in my 12.38 pass

 

[BurningRubber]

Please throw a 100 shot on there once you get to the 11's NA.

 

[trombonedemon]

thanks, i cant waint for a DA near 0! i would love a 116mph pass!





befor i went 12.38@111. i changed the wheels, went to 4.56's from 4.30's, ditched the rear sway bar, and added the 2" plenuim spacer, and the weather was better in my 12.38 pass

2" inch plenum spacer, you must have no EGR Valve.

 

[98COBRA281]

2" inch plenum spacer, you must have no EGR Valve.

no EGR, no IAC!

 

[trombonedemon]

no EGR, no IAC!

Hmmmm? I assume your car is driving fine w/no IAC. Freakin' IAC goes bad about once a year on my car.

 

[Dark04GT]

Please throw a 100 shot on there once you get to the 11's NA.

+1

 

[98COBRA281]

Hmmmm? I assume your car is driving fine w/no IAC. Freakin' IAC goes bad about once a year on my car.

yup, it idles off the TB perfectly!

 

[N8Dogg98]

Wow, nice times man. When you build your engine did you use an iron block or an aluminum block?

 

[BlownStangGT]

Congrats on the amazing times dude! Makes me feel bad for having a blower on my car and running almost the same haha....guess Ill have to go bang an 11.XXXX out now!

 

[98COBRA281]

Wow, nice times man. When you build your engine did you use an iron block or an aluminum block?

its an iron block

here the vid of me racing the s197 on a 125 shot, he posted it on a local forum.

002.mp4 video by 98gt46 - Photobucket

 

[N8Dogg98]

You need to get yourself an aluminum block, then you'll be in teh 11's for sure

 

[fast97gt]

it dont matter, your car is REDNECK. hehehehehehe, i guess srthandz is really eating his words now, heck i bet his lil car dont run 12s. oh well tho, that is super nasty man great job.

 

[purplestang47]

wow that is really impressive im sure you'll break the 11's soon. oh and how do you like your upr suspension and what all are you running from them. i was looking at getting my setup there

 

[Green&GoldGT]

ditch those npi's for the 38cc trick flow heads and youll have a consistent 11 sec car

 

[98COBRA281]

wow that is really impressive im sure you'll break the 11's soon. oh and how do you like your upr suspension and what all are you running from them. i was looking at getting my setup there

thanks man, and i love all my UPR parts, im running k memeber, A arms, 14150 coil overs, flsfc, rear control arms, spherical bucsching in the rear, ect...

ditch those npi's for the 38cc trick flow heads

NEVER! im going to use my complete top end down the road and built a turbo moster! my NPI heads are doing somthing right, because there arent many PI cars running 12.0's....

 

[mazen189]

Aside from the car doing really good. Lets not forget to give big ups to the driver. Good job bro.


and when u going to paint that hood??? because, that is kinda redneck.....

 

[98COBRA281]

Aside from the car doing really good. Lets not forget to give big ups to the driver. Good job bro.


and when u going to paint that hood??? because, that is kinda redneck.....

thanks man, i was planning on painting it this week, but i just came across a trailer for a decent price and im going to look at it this weekend, so if i buy the trailer, the hood will have to wait..

 

[N8Dogg98]

It still amazes me you're able to run those kind of times with self ported NPI's. There are only a few people with ported PI heads on a NPI block that come even close to yours N/A.

How in gods name did you perfectly port the heads yourself???

 

[98COBRA281]

How in gods name did you perfectly port the heads yourself???

what if i told you it was the first set of 4.6L heads i have ever done? and i was only 17 when i did them?

here's an intake port with a pi gasket on it

seriously tho, i have been doing motor, head, ect work for years now, ive been doing it with my dad since i was very young, i used to port the heads on my briggs and stratton 5hp gocart! i even ported my goped 2 stroke head...

 

[navarro98gt]

Doin work!! Congrats and I hope you hit 11’s soon!!!