Post pics of how your foxbody currently sits

[cobra10494]

My car has just about every bolt on covering engine,suspension,exhaust..thats my plan also going with a Vortech base kit 5 psi.Keeps the car driveable everyday if wanted with some boost to enjoy.It's so hard just to leave well enough alone lol.Like your plan brother!

 

[coupestang2]

 

[coupestang2]

 

[Onefine88]

I like that!

 

[coupestang2]

 

[83-gt-hatch]

I did drop the hood to take the pic. To much backlight and letting it cool down before working on it... 6th time the motors been warmedup since Dec. 2003 narrowing down on it overheating

 

[mikestang63]

Installed the new seats and shamppoed the original carpets today. Had to rewire the connectors for the lumbar for both seats. Crappy cell phone pics

 

[90sickfox]

This is my new 88 notchback....soon to have a 331 motor....IRS rear...and 5 speed conversion

 

[Onefine88]

Bath Time! I've been busy with life so the car has been sitting and neglected. Today I found the time to dig her out of the garage and clean her up.

 

[liljoe07]

I'm trying not to paint my car black, and you post this! LoL

That is a good looking coupe!

 

[TOOLOW91]

Just looking through some old pics . (Sigh ) soon enough I'll be back in the seat .


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

 

[HotFox]

Almost finished with 5 lug swap. New tires are mounted on the 2003 NOS ford wheels. Had to see what they looked like on the car. Brakes are bleed, just need to finish park brake mod and cables.

 

[coupestang2]

I'm trying not to paint my car black, and you post this! LoL

That is a good looking coupe!

Thanks Man!

 

[cobra10494]

Bath Time! I've been busy with life so the car has been sitting and neglected. Today I found the time to dig her out of the garage and clean her up.

LOOKS BEAUTIFUL!

 

[cobra10494]

I just replaced my 25 yr old top with a new one along with new hydraulic cylinders and lines..what a difference.White top on red looks beautiful,it pops.

 

[Old Skooler]

Been stockpiling parts for months...

@ shared I have the same Baer set up on my car a little piece of advise get the adjustable ebrake set up, I can PM you which one I used when I get home. The rear install was a pain in the a$$ and would stick until we re-routed the cable and installed the adjustable kick. World of difference!!

It's a great set up, I went to manual breaks because of my cam, took some getting use to but works great once the kinks were worked out.

FYI I used a cobra 1" master the third time and it gives me the best feel and performance.

 

[TOOLOW91]

@ shared I have the same Baer set up on my car a little piece of advise get the adjustable ebrake set up, I can PM you which one I used when I get home. The rear install was a pain in the a$$ and would stick until we re-routed the cable and installed the adjustable kick. World of difference!!

It's a great set up, I went to manual breaks because of my cam, took some getting use to but works great once the kinks were worked out.

FYI I used a cobra 1" master the third time and it gives me the best feel and performance.

@oldskooler any pics of the front with wheel off to see how the whole ordeal still works with 4 lug stuff


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

 

[Old Skooler]

Tomorrow night I'll pull off the wheel and send out. I bought the spindles and everything from Baer

 

[MY 85 GT]

Worked on mine a little it had an ugly grey pinstripe on it removed it started buffing the car out....still see the stripe a little guess its been on for awhile....paint must have faded a little....

 

[Noobz347]

This is going to be a simple build WHY because I went way overboard on my turbo foxbody and I didn't enjoy it...this car has 64,950 miles on it...basically re-paint cobra R hood...cobra insert...maybe a cobra wing...good Idea on the rear bumper wasn't thinking that....no heads cam or intake...maybe just a simple 5-6 psi blower....it already has BBK shorty headers,off road H-pipe flowmaster cat back which im thinking of changing...it is an AOD car with a shift kit and 3.55s...I want to do a 5 spd conversion on it in the near future...I just want a clean nice Foxbody to cruise around in....

ri-i-i-i-i-i-ight


View: https://youtu.be/Fq3QmtV8vT0