Hey
My 8.8 is crapping out on me
I had moser 28 spline axles and they wore abnormally and kept popping clips, so I had to put stock axles back in to fix, now the axles never come out, but the rear is obviously damaged it whines and makes weird noises - clunks when I take off from a stop ...
Hey, my cousin has a mustang 1988 stock motor with AOD. I changed his spark plugs and wires with him, he recently put in a new cap & rotor. When he starts the car up at idle it sounds like he has a cam but he doesn't, and at about 1500-2000rpm it shakes heavily. He's had the car for about 3...
I got moroso trick drag springs in rear, thought maybe if anyone was considering I would post some pics so you can see the height. I am gonna cut a coil or so to lower it some to near stock height, but this is how it sits with the moroso springs untouched right out of box.
had to adjust pic...
Well...Noticed in NY 50* weather even in rain, my car was running at about 195* (with my 180* mr gasket t-stat), then when I would beat on it...it would go as hot as 210*! Don't know about you guys but that is pretty hot for me since I have aluminum heads. The car is also a daily driver. So...
Well first I got ticket tonight for my drag radials being bald as hell. (BS)
-AND-
Same cop gave me ticket for having no cats, when he didn't even look under car or at my inspection sticker (TOTAL BS).
So then I popped on the ET streets went for a lil beating on...
Ok guys if your stang is a daily driver like mine, and you wanna know about some rain traction here is what I have experienced
First of all I run 255/50/16 bfg dr's on rear, and dunlop 225's sp5000 on front
traction wasn't too bad at all around town and in rain with 40psi in all tires (I...
anyone have any fabricated overflows? i saw this 1 mustang at track with like a aluminum overflow setup in place of his washer fluid, he couldn't have made it...it was too professional. anyone have any idea who makes them? i have a electric fan and am looking for a spot to have a nice little...
hey, what is the ideal timing for a 100shot from a wet kit, 10*? I tried out a 75shot with 8* timing, motor was very weak with 8*, Upped it too a 100shot just not sure what best timing is to use I would think more then 8*, also is it best to have nozzle in intake manifold (mine has spots for...
Hello, Recently my power steering pump was making alot of whining noises like supercharger then finally today I lost power steering (RIP my friend.) I got home investigated and saw that the big hose that comes out of it on side near battery popped out, looked like a amplifier plug hanging....so...
What is needed backspacing for a 15x8 and for a 15x3.5
Wheel, 90 Draglite, 15"x3.5", 4x130mm Bolt Circle, 1.75" Backspace
Wheel, 90 Draglite, 15"x8", 4x4.25-4.5" Bolt Circle, 5.5" Backspace
Are those good?
car did 13.3@107 with a 2.0 60' on DR's with old combo which was just a old block, same combo new block.
13.3@102 on et streets last weekend when my plugs were bad and fuel pump clogged, since then dyno tuned to 308rwhp and 337rwtq
also installed some moroso rear trick drag springs!
I...
my stupid BBK AFPR wont go below 44psi no vacuum, screw can go so loose it comes out it just stops going down after 44 its so retarded, its a auto-meter sport comp fp gauge screw in perfectly into shrader valve off a dual fitting 1 going to n2o 1 for gauge, im going to dyno tune car tomorrow...
Hey guys, based on my specs in sig, on slicks what you guys think im gonna run? post some guesses and ill give times when I get back :nice:
car gonna be about 3300lbs
10.5 E.T. Streets with about 15psi
225/50/16's in front with 44psi
93 octane
suspension is just lca's, and subframes...
Hey, I'm running 24# injectors and 55psi no vac with my hefty cam in order to maintain proper A/F ratio, alot of times when I floor it car will hesitate not EVERY time, but most, and when car is full (with people) and I floor it...it likes to hesitate some more...its almost like RPMS sputter I...
Monday I ordered alternator upgrade kit from pa-performance, with long std power wire (total: $240)
Tuesday it arrived, PA to NY doesn't take too long I guess :)
Anyway, I put it in today and I have to say this is probably one of my favorite mod's on the car now......At idle battery is at...
I got no cats, long tubes, 2.5" dynomax and in this cold weather (New York) my car seems to be showing alot of smoke, anyone else noticing this too?
:rolleyes:
on pony rims, is it better to put a 245/50 on back or 255/50? I want to get the max size I can fit without any problems, I ran 245/50's for a while now it's time for some new tires, I wanna go bfg 255/50's, will their be any problems?
:flag: