Search results

  1. BelueLX

    Help with injectors size suggestions

    My car came with 30# injectors in it. I figured they were a little too big before I even heard it run. It is a .040 over 302... has ported and polished '69 model 351 heads, unknown camshaft, ported and welded intake manifold, 75mm TB, full exhaust, roller rockers. It runs strong, but puts out...
  2. BelueLX

    Anyone use a painless wiring engine harness... 6Xs with EFI ???

    Has anyone with a 6X Mustang installed a painless engine wiring harness on their car when swapping to an EFI 5.0L ??? Wondering how much it costs and how hard it is to wire up. Looking at purchasing a 1967 Mustang with a 1994 GT 5.0L and AODE tranny in it. Has a hacked '94 GT harness I just...
  3. BelueLX

    can anyone ID this intake... similar to GT-40

    Can anyone ID this intake manifold by the number on it. I was under the impression it was a GT40-Cobra lower. The person who bought it is saying it is not and their boxed truck upper will not bolt up to it. Thanks for any info. Number on it: XRF-E6SE-9K46(1?)-BA Thanks.
  4. BelueLX

    Ceramic brake pads -vs- Organic brake pads... any benefit

    Ceramic brake pads -vs- Organic brake pads... is there any benefit. The Wearever Silvers are like $20 and the ceramic brake pads are about twice as much. Is there any real advantage? What kind of brake pads do you suggest if you have changed them and been really happy with your new ones ...
  5. BelueLX

    Help please ! Forgot PW for my other SN...

    I had a screen name back in '99 and forgot the PW. It was BelueLX being my last name and I owned a LX Coupe. I know the email address I had it registered to I just cant access it because I am no longer with AOL and it is saying the name is taken. Is there any way I can fix this without...
  6. BelueLX

    belt routing for water pump, crank and alt only?

    My friend used a belt and ran his water pump, alternator and crank pulley only with the stock brackets (on an 87-93 Mustang) . Does anyone know the belt size so I dont have to search thru Advance Auto for one that fits? Thanks.
  7. BelueLX

    Anyone got a 96-98 GT Vert Auto... Drag times ?

    Does anyone have a 96-98 GT Vert automatic that they've ran at the drag strip? If so what are your times and mods. Thanks.
  8. BelueLX

    Quietest Free Flowing Muffler

    I have Flowmaster 2-chambers with turndowns right at my rear axle (along with a Mac Off-Road h-pipe) and every time my girlfriend rides in the car with me she says "your car is too loud its giving me a headache." We dont ride in it often but I would like to make it quieter for that reason and...
  9. BelueLX

    Underdrive Pulleys and RWHP ???

    Ive had a few sets of underdrive pulleys on various Mustangs and seen some pretty good results as far as ET and trap speeds (like .1 / nearly 1.5 mph...). Has anyone actually taken the time and trouble to do a before and after dyno? Just wondering not that its of any importance just wondering...
  10. BelueLX

    Looking for AFM Hi-Rev Springs and Titanium Retainers Help!

    I see the AFM Hi-Rev Springs and Titanium Retainers listed on the AFM website but dont see a part number or more importantly a price. Does anyone know what they cost and can anyone give me a part number? Thanks, Cody B
  11. BelueLX

    help me pick a carb...

    Ok here are my mods: stock 91 H.O longblock weiand dual plane intake manifold longtubes and full 2.5" exhaust MSD pro billet distributor what size carb do i need 600 or 650? can anyone with a similar setup help me with jet sizing and timing settings? im going to put an o2 sensor in...
  12. BelueLX

    GT-40 Crate engine + Boost???

    Im looking at a GT-40 crate engine to replace my tired old engine with 150+ k miles. Im running high 11.9xs@113mph in the 1/4 with my stock longblock and 15 psi. Is anyone running a Vortech with a Gt-40 crate? I guess I can make more power at a much safer boost level with the newer engine. I...
  13. BelueLX

    what does a stock E7TE weigh?

    what does a stock E7TE weigh? does anyone know? i calibrated my scale at 50lbs with weights then put the head on and it weighed in at around 48lbs. just wondering if my scale is accurate?
  14. BelueLX

    What backspacing for Welds? Small front and 8" rear? Got pics?

    What wheel back spacing and rim width do you use on your 5.0? I want Weld Draglites-- I guess 3.5" or 4" skinnies for the front and my slicks are 26/8.5 . Got pics? Thanks, Cody
  15. BelueLX

    vaccum secondaries -vs- mechanical... throttle response

    vacuum secondaries -vs- mechanical... throttle response Ive heard to get a carb with mechanical secondaries for throttle response / drag racing. I found a good deal on one with vacuum secondaries. How much will the vacuum secondaries hurt me off the line and at the strip? Havent really dealt...
  16. BelueLX

    vacuum secondaries -vs- mechanical... throttle response

    Ive heard to get a carb with mechanical secondaries for throttle response / drag racing. I found a good deal on one with vacuum secondaries. How much will the vacuum secondaries hurt me off the line and at the strip? Havent really dealt with carbs much Ive always had efi. Thanks, Cody B
  17. BelueLX

    does the cyl. with the highest comp. usally break first (under boost)?

    does the cylinder in a 5.0 with the highest compression usually throw a rod/ blow a headgasket/ break a connecting rod because its making more power than the rest? i was wondering because my car has 120# compression on all cylinders except #4 and it blew a headgasket on the rear of #4 a few...
  18. BelueLX

    What carb and intake for stock E7 headed combo?

    Im thinking about just throwing a carb and intake on my spare engine and running it in my blown car (stock E7s, E303 cam, longtubes). What size carb and intake do I need? Would a 600 Holley DP be plenty of fuel for now? Do I need to get a single plane or dual plane manifold (3.73 gear, C4...
  19. BelueLX

    help... having a surge demon problem...

    My cars idle jumps between 600 and 1200rpm. Im running a C&L73mm MAF. When I unhook the MAF connector the car holds a solid 1200rpm idle and doesnt move. If I cut the idle any lower than 1200 the car will surge its way off. Any ideas if my MAF is bad or...? I dont have any codes or a check...
  20. BelueLX

    having a weird wiring (???) problem... HELP

    OK heres the deal: My car started running really bad. I thought the distributor, cap, rotor or TFI module could be bad so I swapped the distributor assy with a spare and played around with the wire running to the distributor. If i wiggle that wire, you can hear the fuel pump relay cutting on...
Top Bottom
Back
Forums
Menu