Search results

  1. L

    9 inch wides front wheels?

    Im going to convert to five lugs as soon as I get this wheel thing sorted out.Im using the 400 dollar kit they have at 50 resto and was wondering is anyone using 17 by 9 wheels on the front of your fox. I cant find any 03 cobra wheels that are 8 inchs wide and thats the wheel I want to use. If...
  2. L

    did h/c/i now wont idle

    I just put the trick flow street heat kit on my car now it wont idle or go. I try to set timing at 14 degrees with the spout out or in but it wont idle. I have to have the timing set much higher. My fuel pressure is at 40 psi and i have 24# injectors and a pro m 80mm mass. When i drove it it...
  3. L

    oil pan gasket

    I need to know is the stock oil pan gasket a blue rubber one from the factory.I pulled my front cover off yesterday for my h/c/i and saw that. Just wondering if the gasket has been replaced.
  4. L

    where to get pro m

    Where can I get a pro m mass air meter from. I usually order everything from summit but they dont carry it and brothers performance says they are temporarily unavailable. :shrug:
  5. L

    air bag light blinking

    I just changed my radiator and when I started it the air bag light started blinking. It blinks twice pauses then blinks three times and repeats. Does anyone know what this is as it is bothersome and scary. :shrug:
  6. L

    subframes and renforcement plates

    I am ordering mm full length sub frames tommorow and was wondering is i should make some renforcement plates for the torque boxes. They are the plates that u weld to the bottom of the torque box. Does anyone have them and are they worth my time. I will weld the seams while im under there and get...
  7. L

    touchy ignition

    I just bought a new ignition and key and put it on.When I drive down the road and hit a bump the radio shuts off or the car will shut off.It did this before the new ignition.If it shuts off I have to turn the key a little bit and it will turn back on.Does anyone know what the problem is as it is...
  8. L

    aod problems

    when i come to a stop and then try to go again it slips out of gear.it revs up and when i let off and give it gas again it goes back into gear.if i slow down,turn and then give it gas it does the same thing.could i just get a shift kit or do i need a rebuild.cant really afford the down time but...
  9. L

    rack and pinion leaking

    My rack and pinion is leaking from the rubber boots and I need to know if I can just replace the seals or do I have to buy a new rack. :shrug: thanks.
  10. L

    summit radiator

    I need a new radiator and dont know what size to get. I am looking at the two universal radiators at summit(part#sum-380428 and sum-380431).Has anyone used one or know what size I should get. :shrug:
  11. L

    how to set timing

    In my book it says to disconnect the spout connecter(terminal 36)which controls the electronic ignition advance.Do I have to do that or not.If I do could please tell me where it is.If anyone has any pictures it would be appreciated.Thanks.
  12. L

    vibration while slowing down

    when im on the freeway doing 75 or more and I let off the throttle there is a weird noise.It vibrates a little and is really annoying.It stops after I pass 75.This started after I put my gears in and was thinking it is my driveshaft.Has anyone else had this problem or a solution. :shrug:
  13. L

    pinion bearing preload

    I am putting new gears in my car and I cant find an inch pound torque wrench to set the bearing preload. Is there any other way to set it?Is there any other tool I can use to set the preload? :shrug:
  14. L

    window scratching

    My passenger side window scratches when you roll the window up or down.It has long scratches in some placesand I dont know why.Does anybody have any idea why it is doing this? :shrug:
  15. L

    AOD and nitrous what gears?

    I have a 92 lx that is pretty much stock.I have an AOD and 25.5 inch tires and plan to add 100-150 shot of nitrous in january.I have searched the forums on gears but I havent really found a set up close to what I am planning. Should I go with 3.73 or 4.10 gears. :shrug: The reason I ask is...
Top Bottom
Back
Forums
Menu